Spring Card with Bunnies

I wanted to make a nice spring card to send to my book box swap partner (Maria), so I went looking at some of the cards I have pinned on Pinterest to get some inspiration.  Right away I found one I liked.  It is pinned from KittieKraft’s blog — she makes the most beautiful cards.

I have always wanted to make a wreath card and figured this was the perfect time.  While I didn’t have the dies she used to make the wreath, I did have the die to make the cute bunnies.  So I used two Martha Stewart punches to make the wreath — the branch punch and the medium frond punch and I followed Kittie’s tutorial on making the wreath.  For the flowers, I used another Martha Stewart punch — the 3-in-1 Hydrangea punch.  I used the two smaller blossoms for the flowers.

6

I have been wanting to try my new Anna Griffin Cuttlebug Lace Trimmings embossing folders and dies and thought they would make a nice background for the wreath.  I had no problem cutting the borders, but I did have a bit of a problem trying to emboss them.  The white cardstock embossed fine, but the yellow kept slipping in the folders and the embossing was all over the place.  The yellow cardstock is heavier than the white, so I thought that might be the issue.

I ended up lining the border up inside the folder and taping it (using blue painter’s tape) to the Cuttlebug plate.  I was still having a problem right at the end of the folder, where it opens.  So I turned the folder around and ran it through the Cuttlebug with the open end first and then it embossed nicely.

I cut the bunnies in white cardstock and inked them brown using Walnut Stain Distress Ink.  The flowers have Stickles in the centers and the bow was made using my Zutter Bind-it-All.  I sure love how easy it is to make bows using the Bow-it-All.

4

 

  • Martha Stewart punches:  Branch, Medium Frond & 3-in-1 Hydrangea
  • Anna Griffin Cuttlebug Lace Trimmings Embossing Folders & Dies
  • Zutter Bow-it-All
  • Stickles

Pac-Man Card

 

Erin asked me to make a birthday card for her to give to one of her friends and she requested something with an 80’s video arcade game on it, like Pac-Man.  I found a print card showing Pac-Man eating dots and heading towards a birthday cake.  So I did my version of that card using my Cricut.

I first printed a maze from the game that I found online.  I thought it would make a neat background for the card.  I designed Pac-Man in Cricut Craft Room, using the George & Basic Shapes cartridge.  I used a circle and laid a triangle over it (not using the weld feature) to make the mouth.  His eye is a black faceted stone from my stash — I think I got them at Joann’s.

Front5

The white dots are from an EK Success punch — I think it’s called Swiss Cheese. The birthday cake is from Life’s A Party and I added orange Stickles for the flames on the candles.  Pac-Man, the white dots, and the birthday cake are all popped up with foam dots.

Front

When I was laying out the card in Cricut Craft Room, I happened upon a really neat sentiment that I thought would be great with this card.  It is from a project cartridge called Space Party.  But wouldn’t you know it, it was one of the few cartridges that I didn’t have.  I looked at other fonts, but nothing grabbed me like the Space Party sentiment.

So I went on eBay, found a Space Party cartridge that wasn’t being bid too high and placed a bid.  I ended up getting it for less than $2.50 — can you believe that?  Still, I hope I use it for more than just the sentiment on this one card!

This was a pretty quick and easy card to make — and Erin was very happy with it.  I even made an envelope for it using my We R Memory Keepers Envelope Punch Board.

I am going to enter this card in the Cricut Circle Challenge, which is to use or try something new.  Since I have never used Space Party before, I figure that will satisfy the requirements.  And I used the Swiss Cheese punch, which I have owned for some time and have never used either.

  • Cricut cartridges used:  George & Basic Shapes, Life’s A Party, Space Party
  • EK Success Swiss Cheese punch
  • Stickles
  • Faceted stone from stash

 

 

My First Mini Album

Yesterday I posted the mini album I received in a swap.  Today I want to share the mini album I made for my swap partner.  I took a ton of pictures — I think because after spending so much time making the album, it was hard for me to part with it.  I felt like it was part of the family 🙂

I made several wonderful discoveries along the way while making the album.  First and foremost, I discovered some wonderful mini album tutorials on Etsy.  You can find them in Cathy’s shop, which is called SoMuchScrap.

I have been researching minis on the internet for a long time and knew I wanted to make something with interactive pages.  After finding Cathy’s tutorials, I knew this was the way to go for me.    I purchased her binding tutorial and her Je’ T’ Adore tutorial for a 6″ x 6″ mini.  All I did was change the papers to a fall theme.  The tutorials are excellently written and have step-by-step instructions as well as pictures to guide you through each page.  Another plus about purchasing from Cathy is that she readily answers any questions you might have.  So, with big thanks to Cathy, here is my mini.

Thumb

I used paper from BoBunny’s Forever Fall collection.  The solid cardstock is all from papertemptress.com.  The brown trim and ribbon are from Joann’s.  Another discovery I made was book cloth — I used imitation suede book cloth to cover the spine of the album and a glue specifically designed for bookbinding.  I was amazed at how easy it was to apply the cloth.  I picked up these supplies at Hollander’s.

Front2

The title is from two Spellbinders dies, Labels 4 and Grommet Tags.  I embossed the bottom layer with the Distressed Striped Cuttlebug embossing folder.  I added highlights with a copper ink pad and sponge.  The “Autumn Splendor” is from a Close to My Heart stamp set with the same name, heat embossed with Lindy’s Stamp Gang’s embossing powder.

That is another of my discoveries — Lindy’s Stamp Gang‘s products.  I bought their Autumn Leaves Mega Set and I can’t say enough good things about it.  I love their sprays and embossing powders — they are gorgeous.  Look at the heat embossing close up — their powder not only embosses but also adds a shimmer, which you will see in the second picture.

Title

The dragonfly is from a Martha Stewart punch and I sprayed him with Lindy’s Starburst Spray and dried him with a heat gun.  I added a chocolate pearl to each side of the tag.

TitleEmboss

The rhinestone embellishment is from Michaels, from their Recollections brand.  I made the three flowers on the front, using Spellbinders Jewel Flowers and Flourishes for the sunflower.  The two smaller flowers are cut with my Cricut using the Flower Shoppe cartridge.  I added Stickles to the centers of the small flowers and Flower Soft to the center of the sunflower.

Flowers 

Flowers2

On the spine I hung a charm on a Tim Holtz ring fastener that I made with supplies I picked up at Joann’s. This was my first time making a charm — and I love the way it turned out.

Spine

The pendant is glass and it reminded me of a leaf shape — so I figured it would go well with the album.

Charm

OK, let’s look inside the album.  Here are pages 1 and 2.

1-2

The first page has a pocket and I used a Martha Stewart border punch on it.   There is also ribbon running under the sentiment.

1

The sentiment is a graphic I got from the Internet and cut out with a EK Success punch.  I made the leaves using a Cuttlebug die.  I found this video on making leaves and they were really easy to do.  She uses the Tim Holtz Tattered Leaves die for her leaves, but I found them to be too large for what I wanted.  The Cuttlebug die leaves were just the right size.  The leaf on the right has Crackle Accents on top of it and the leaf on the left has matte medium coating it.

1Verse

I made two tags to sit inside the pocket, using Distress Ink, stamping, heat embossing , and seam binding ribbon to create them.  The ribbon is colored with Lindy’s sprays.  

1Tags

The pumpkin is from a Cuttlebug Cut and Emboss die, the sentiment is computer generated,  and there is another dragonfly from the Martha Stewart punch.  I kept the backs simple.

1TagsBack

Page 2 is an interactive page, folding up and closing with a small magnet.  I used Basic Grey magnetic snaps throughout the mini.   The Scrabble letters are from a Whimsy stamp (Spell It Out), heat embossed with Lindy’s embossing powder.  The sunflower is from a Heartfelt Creations stamp, colored with Copics and cut out.

2

This is page 2, partially open, revealing a tag inside.  The flowers are Recollection from Michaels, sprayed with Lindy’s Starburst Spray and topped with Stickles in the centers.  The pocket that holds the tag is a label shape from Spellbinders, cut in half.  The rectangle on the mat at the right is attached only at the bottom and right hand side to create a pocket to slip a photo in.

2Open1

I learned so much making this mini — like how to make tabs for tags using the We R Memory Keepers Envelope Punch Board.  I watched this video.

2Tag

I made the backs of all the tags the same — I created a little spot for journaling.  I used the Cricut cartridge Simply Charmed for the notebook paper, using colored pencils and a ruler to go over the score lines.

TagsBack

This is page 2, fully opened.  I created corners by cutting a square in half and embossing them with Darice’s Fall Leaf folder. The stamps I used throughout the album are either Close To My Heart, Inkadinkado, or from Michaels $1 bin.

2Open

Next up are pages 3 and 4.

3-4

The leaf is from a Spellbinders die and the sentiment is heat embossed.  The square the leaf is on is only glued at the bottom and left hand edge to the page — to create another pocket.  There is a mat that pulls out with a ribbon tab.

3

The mat is good sized.  This is the back, which I stamped with a Close To My Heart Stamp.  I used Memento Rich Cocoa Ink for the stamps that aren’t heat embossed.

3Mat2

Page 4 is another interactive page.   The title is from the Simply Scarecrows Cricut cartridge and sprayed with Lindy’s Starburst sprays.  The small leaves are from a Martha Stewart punch.  The ribbon opener features a brad from the BoBunny Forever Fall collection and closes with a magnet.

4

And here’s what it looks like open.

4Open

Now were moving on to pages 5 and 6.

5-6

Page 5 has a mat that pulls out of a pocket and folds over, forming the front.  It is held in place with a magnet.  I kept the front simple, adding a couple of leaves and another dragonfly.

5

This is page 5 open.  There is a tag inside.  The pumpkin on the mat is from the same Cuttlebug Cut and Emboss die that is on the tag in the pocket on page 1, with the leaf cut off.  It is attached only at the bottom and left side, so a photo can slip inside.

5Open

Two pictures of the mat, front and back.

5Mat

 

5Mat2

Page 6 has a waterfall feature.   The BoBunny charm sits on two Spellbinders ovals.  The brad is also from the Forever Fall collection, using dyed seam binding to wrap around it as a closure.

6

Each layer of the waterfall has an embossed trim strip at the bottom and a pocket with a tag at the top.  This is the uppermost layer.

6WF

Here is the tag, partially pulled out.

6WF2

The second layer of the waterfall.

6WF3

This is a close-up of the brad.  I again used the Martha Stewart border punch for the leaf border.

6Brad

This shows how the waterfall closes.  You will also notice two brads in the spine of my album.  Cathy’s binding tutorial shows how to add strength to your binding system by not only taping it to your spine, but by adding brads.

6Closed

We’re getting near the end.  Here are pages 7 and 8.

7-8

Page 7 has a pocket at the bottom.  The label is a Spellbinders die and the sentiment is heat embossed.  There is another pull out mat in the pocket on this page.

7Open

Page 8 features a mat that folds around to the front and is held in place with a magnet.  There is a pocket at the bottom and the curved oval shape (a Spellbinders die) is attached at the bottom to the pocket only.  The embossing is from the Cuttlebug Divine Swirls folder and is highlighted with gold metallic ink.  And there is one more of those little dragonflies on this page.

8

This picture again shows how wonderful Lindy’s Stamp Gang products are — look at all that sparkle.  I used more than one color on the dragonfly.

8Emboss

This is page 8 with the mat partially out.

8Open2

And we’re to the last of the pages, pages 9 and 10.

9-10

Page 9 is a fun interactive page.  It has a brad and seam binding closure.

9

The sentiment is attached at the lower and left edges only, forming a pocket.  The small leaves are the negative cuts from the Martha Stewart border punch, sprayed with Starburst Spray.

9Verse

Page 9 opens to reveal another tag.

9Open

The left side of the page then opens up to reveal two more spots for photos.

9Flap

Page 10 is the inside of the back cover.  It has a pocket at the right hand side with a folded photo mat tucked inside.

10

I again used some Recollection brand rhinestones on the pocket.

10Rhinestones

The photo mat features a hexagon made with the BoBunny paper using an Epiphany Crafts tool and  bubble cap.

10Mat3

How cool is that hexagon?

10Epiphany

This is the inside of the mat.

10MatInside

And, finally, we are to the back cover of the album.

Back

Thank you for taking a “tour” of my mini album.  And I want to share my last discovery — I discovered that I love to make mini albums.  I am already planning my next one.

Front

 

  • BoBunny Forever Fall Collection
  • Cricut cartridges:  Flower Shoppe, Simply Charmed, Simply Scarecrows
  • Cuttlebug:  Divine Swirls folder, Distressed Stripes folder,  Fall Leaves die, Cut and Emboss Pumpkin Spice
  • Spellbinders:  Labels Four, Grommet Tags, Jewel Flowers and Flourishes
  • Lindy’s Stamp Gang embossing powder and Starburst Sprays
  • We R Memory Keepers Envelope Punch Board
  • Martha Stewart punches
  • Recollections rhinestones
  • Stickles
  • Flower Soft

Open Book Easel Card

 

I made this card a while ago to send to a lovely lady on the Cricut Circle Message Board who was celebrating her 65th birthday.  I wanted to create a special card for her and first set out to make one using a Bookatrix Board.  I picked one up on eBay a long time ago and have yet to use it.  It’s basically an embossing board and you emboss the edges of the pages for the book and then cut them out by hand.

As I sat reviewing videos on YouTube on how to use the Bookatrix Board, I couldn’t help but wonder why I couldn’t do something similar with my Cricut and not have to cut everything by hand.   So this is my attempt at “Cricut-izing” a Bookatrix card. And I have to say I am very happy with how it turned out.

Thumb

The solid cardstock is Bazzill and the printed papers are all from Graphic 45’s Secret Garden collection.  And because I want to remember how I made this card, I am posting a little tutorial.

Front4 

The book is from the Summer Celebrations Cricut cartridge and is the card feature.  I put it on my mat in Cricut Craft Room (CCR) and made the measurements 8″ wide by 5.5″ high.  I took two lower case “v”s from Cricut Craft Room Basics, turned them upside down and welded one into each upper corner to hide the notches that are in this particular cut.  I also hid the score marks that are in the center of the book.  This is layer one (the back layer on the card) — I guess you would call it the cover.

Next is the middle layer.  I copied and pasted the first (cover) layer onto another mat and made it 7.75″ wide by 5.25″ high.  I did the top (third) layer the same and it measures 7.5″ wide by 5″ high.  I cut out all three of the layers.

I laid the top and middle layers (the pages) on my scoreboard along the width and found the center.  Then I scored a line 1/4″ on both the left and right side of center.  This enables you to fold the pages up slightly and have them sit away from the cover. It is also the area that you will be gluing to attach the layers together.  I distressed the edges of the pages only (the middle and top layer) and then inked them.  I took a dowel about 1” in diameter (from Lowe’s) and curled the pages under, curling one layer at a time.

Dowel

The base for the easel card is a piece of solid cardstock that measures 7″ wide by 10″ high.  Lay the 10″ side on a scoreboard and score at 2 1/2″ and at 5″.  It should look like this unfolded.

BaseUnfolded

And here is how it looks folded.

BaseFolded2

Cut the remaining pieces.  The frames on the pages (for the owl and verse) are from Elegant Edges and cut at 3″.  The label where I heat embossed “Happy Birthday” is from Cricut Craft Room Basics and I fiddled with the dimensions to get something that would fit in the area I had to work with on the base of the card.  The bottom layer measures 5″ wide by 2.75″ high.  The middle layer is 4.75″ wide by 2.5″ high.  And the top layer is 4.5″ wide by 2.25″ high.

The mat for the easel card base is 6 3/4″ wide by 4 3/4″ wide.  I used a corner punch on the front two edges.  This is what your pieces should look like.

Pieces

To assemble the card, I first attached the book cover (layer one) to the easel base.  I centered it across the width and had the bottom edge of the book even with the edge of the base.

Adhere the middle and top layer together, putting the adhesive in the 1/2″ center area created by the two score marks. Before attaching the pages to the cover, lay ribbon down the middle and attach it on the back of the pages at the top and bottom. Adhere the pages to the book cover in the center only.

Assemble the frames, using whatever cuts/designs you wish in the middle.   I used the dowel to curve the frames just a little so they would conform to the pages.  The computer-printed verse is a layer of the frame.  I adhered the frames to the pages before adding the owl.  I used the owl from Disney’s Happily Ever After, cut at  2″, and attached it with foam dots.

The daisies are from the Flower Shoppe, cut at 1″.  The roses are from the Paisley cartridge.  I posted a card here where I give the measurements and a link to a tutorial on how to make the roses.  Both are cut from cream-colored cardstock and I inked the edges with distress ink to add color.  The center of the daisies are Stickles.

This is what it looks like up to this point, lying flat and minus the owl.

Unassembled

The “Happy Birthday” label is popped up on foam dots and is what holds the easel card up.  I added a bow at the top of the ribbon in the center.

The greenery around the flowers is from a Martha Stewart punch, as are the butterflies.  I attached a little gold key charm on the “Happy Birthday” label, which you can barely see in this picture.  Oh, I also added a pearl to each corner in the front.

Front2

This is a side view of the card, so you can see how it stands.

Side

And this is what the completed card looked like folded flat.

FoldedFlat

Because my card would not fit into a standard envelope, I made a little box for it to sit in.

InBox

 

Boxed

At some point I will probably post this in Cricut’s Project Center and will attach the file.  In the meantime, I hope you enjoy this little tutorial.

Front5

  • Cricut cartridges used:  Cricut Craft Room Basics, Disney’s Happily Ever After, Elegant Edges, Flower Shoppe, Summer Celebrations
  • Bazzill cardstock
  • Graphic 45 Secret Garden collection
  • Martha Stewart punches
  • Ribbon
  • Key charm
  • Stickles

Bee Towing Banner Thank You Card

 

I made this whimsical card for the weekend challenge on the Cricut Circle Message Board.  The challenge is to make a project using a sun.

The card measures 6″ x 6″ and the background is printed from a graphic I purchased when I was a member of the PC Hug Club.   Unfortunately, that site no longer exists — I wish it did because they had some really cute clipart.

FrontSm

The sun is cut from Gypsy Wanderings at 2″ and embellished with some Stickles.   The bee is from Creative Critters 2 and it is cut at 1.75″.  I trimmed the hearts off the ends of the antennae and added pompoms.   I added some Stickles around the edge of the wing.  The bee’s face is a Peachy Keen stamp.   I inked and chalked the face.

The banner is cut from New Arrival (it is the banner with the plane) and it is cut at 1.5″.  I inked the banner and added a stamped sentiment from one of the many Studio G $1 stamps that are in my collection.   I used DMC Memory Thread for the banner’s tow ropes.

Front5

For the inside of the card, I used another graphic from my clipart collection.

Inside

  • Cricut cartridges:  Create a Critter 2, Gypsy Wanderings, New Arrival
  • Provo Craft clipart
  • American Craft cardstock
  • DMC Memory Thread
  • Stickles
  • Ink, chalk
  • Peachy Keen stamp
  • Studio G stamp
  • Pompoms

Circleville NSD 2013: Go Big Or Go Home! Challenge

 

I made this card for one of  Circleville’s NSD Challenges.  The Go Big Or Go Home Challenge was created by Sara.  She challenged us to create a layout or card  using an oversized photo or title.

I made a card, since I needed one for my younger brother’s birthday today — he turned 64.  He recently bought a wood lathe and has been having a blast making some beautiful wood projects, so I wanted to use a wood theme for his card.  I pulled out my Imagine Snapshot: Nature cartridge and printed a bark pattern for the background and a lighter wood grain pattern for the letters.

Front10

The card itself is made from kraft paper.  Happy Birthday is from Something to Celebrate and is cut at 3.5″.  I inked and chalked all the pieces before gluing them together.  This card is simple, but I really like how it turned out.  I put some money inside so my brother can go to the wood store and get something he wants.

Front9

  • Cricut cartridges – Snapshot: Nature (Imagine), Something to Celebrate
  • Chalk
  • Ink
  • Stickles

Circleville NSD 2013 — What’s It Owl About?

 

Thank you for stopping by my blog.  To celebrate National Scrapbook Day, some of the crafty members of the Cricut Circle are posting projects and activities on the message board all weekend long.

I created a challenge for my project and would like to share it with you.  My theme is owls — and the challenge is pretty simple, just create a project with an owl on it.  I made a layout using a cute owl family from Hoot ‘n’ Holler.

LO3

I laid out my design in Cricut Craft Room.  The patterned paper is printed on my Imagine using the Nursery Tails cartridge.  The solid cardstock is from Bazzill.  I began with Elegant Edges for the scalloped square in the background, cut at 10.5″, using <sclop2-s> and the shadow feature.  I used a white Sharpie poster paint marker to make the “stitch” lines around the square.

Scallop

Next I cut the two wood frames from Pooh & Friends at   5.5″ and 6.5″.  The frames are three layers — the basic feature and then two on the blackout feature.  For the piece cut using the printed paper, I hid the inside cut lines in CCR, so the piece was solid — it did not look like a frame.   Here is a picture of what it looks like in CCR.

FrameMat

I first assembled the basic cut and the blackout frame feature, adhering them together.  Then I prepared to glue the frame to the printed frame piece.  I wanted to leave an edge open so the picture could slide inside, so after deciding which end I wanted to leave open, I glued the frame to the mat on three sides only.  I used a liquid glue, but for the photo I laid some papers on the frame to show you were I put the glue. I did this to both frames.

FrameToMat

You can see in this photo how the pictures will slide into the frames.  I used a piece of scrap cardstock for demonstration purposes.

FramePic

Next was adhering the frames to the layout.  Since I wanted to hide tags behind the frames, I put the adhesive on the back of the frame the same way — gluing only 3 sides.  I marked the back of my frame to indicate which side was open for the photo, so I could be sure and leave the same end open for the tag.  I used the red sticky tape to adhere the frames to the layout.

FrameTape

Before attaching the frames to my background, I laid the cut pieces on it to get an idea where I wanted to place the frames.  I made light pencil marks on the background to guide me in the placement.

FramePlacement

I then checked to make sure the tags slid into the pockets behind the frames.

FramePocket

 

I made the tags to fit behind the frames, adjusting them in CCR to get the proper fit.  I used Tags, Bags, Boxes & More and the cut is <rndtop2>.  The large tag is 6.5″ x 3.75″ and the small one is 5.5″ x 3.125″.   The lined notebook paper is from  Simply Charmed, cut at 2.75″ x 4.5″ and 3.375″ x 5.375″, with the facial features and holes hidden.  This is a screenshot of the CCR file for the tags.

Tags

 

I used a punch to round the corners and a ruler and colored pencils to go over the score marks on the paper to make it look like actual notebook paper.  I just lightly held the pencils to the paper.

ColorPencils

I adhered the notebook paper to the tags.

Tags3

Next up was the owl family.  They were cut at 5″ using Hoot ‘n’ Holler.  After I cut all the pieces, I used chalk and ink to shade them.  I went over all the edges with chalk first, using a pom pom and chalk applicator.  Then I inked the edges using Distress Ink.

Chalk

 I assembled each owl first and then glued them onto the branch.  I bought a mustache punch a couple of weeks ago, so I had to try it out on Papa owl.  I think he looks pretty dapper with it.  The bow on Momma owl’s head is from Simply Charmed.  I attached the leaves next.

Owls

After adhering all the owls and leaves onto the branch, I attached the branch to my layout.  The owl cut did not include the flowers.  I used Cricut Essentials, cutting Flower 4 at 1″.  I cut three for the branch and four for the tags.  I used Distress Ink (Squeezed Lemonade) to ink the edges of the flowers and Stickles for the centers.

OwlsCU

 The title is from Hoot ‘n’ Holler, cut at 3″.  The scallop oval is from Francy Frames and the cut is <fram13lr>.  I hid the inside cut so I ended up with a solid piece.  I resized the oval to fit the title and it measures roughly 5.625″ x 3.75″.

TitleCU

Here is a picture of the completed layout with the tags pulled partially out.  Hiding journaling tags behind your photo mats is easy to do.

LoTags

LO7

To top off the fun,  I am offering a prize for comments here on my blog.  All you have to do is leave a comment, but only one per person will go into the drawing.  I will leave it open for a week, until May 12 at 8 p.m. (EDT), when I will randomly draw a name.  I am giving away some Graphic 45 goodies — an 8″ x 8″ Secret Garden paper pad and a small matchbook box.

SecretGardenCover copy

SmMatchbook copy

I am sharing a list of some of the talented members of Circleville who have joined together for the weekend festivities and invite you to visit their blogs and see their wonderful projects:

NSD1_edited-200

 

Cricut cartridges used:  Elegant Edges, Fancy Frames, Hoot ‘n’ Holler, Nursery Tails (Imagine), Pooh and Friends, Simply Charmed, Tags, Bags, Boxes & More

  • Bazzill cardstock
  • Distress Ink
  • Chalk
  • Stickles

 

Window Card Using Cricut Creative Cards

There is going to be a new Cricut cartridge available on February 21, 2013 and it is called Creative Cards.   For one week only, from February 14-20, there are seven cards and envelopes from this cartridge available to use for free in Cricut Craft Room.  I was  happy I found time to try one of these cuts — I chose to make the window card.

I really like this card, so much so that I will surely purchase Creative Cards.  I think the window card is called a tri-fold card.  I like this because the inside of the card, where I will write my greeting, is not visible through the window.

A

I made my card using spring colors and the first thing I did was decide what paper was going to show through the window.  I wanted something that looked like wallpaper, so it would look like the inside of a house.  I looked through my Imagine cartridges and found a striped print I liked on the Blossom cartridge.  After picking out my wallpaper, I decided my card would be blue.  All the small pieces were cut from scraps.

The card is cut at 5″ and the finished size is about 3.5″ x 5″.  I cut an extra front panel and ran it through the Cuttlebug using the Distressed Stripes embossing folder so that it would look like siding on a house.  I cut a piece of clear acetate and adhered it between the two front pieces to give the appearance of glass.

The curtain is a piece of vellum run through the Cuttlebug using the Swiss Dots folder, backed by a piece of white cardstock.  The outside window and flower box are white.  I cut an extra window in a darker blue and used it on the inside because I wanted a finished look in there too.

Inside2

The bird and butterflies are from Creative Cards and both were cut at 2.5″.  The only other cartridge I used was A Child’s Year to cut the silhouette of the cat, which was cut at 2″.  I inked and chalked all the pieces before assembling the card.  I used Stickles for the centers of the flowers.

Card6

The sentiment below the flower box is from Whimsy Stamps and it is from their Celebration Circle Pennants set.  I cut it out using the matching die.  This was my first time using both the stamps and die, and I am very happy with how it turned out.

On the inside of the card, I added a white mat to write on.   It is the inside of the window from the card cut — I just hid the outline for the card and cut only the window.  I embellished it with a couple of the same flowers from the window box on the front.

Inside

The last step was making the envelope, and that turned out to be an easy task.  I simply cut the envelope at the same size I cut the card, which was 5″.  I scored along the two side flaps and then at both the top and bottom.  I folded at the score marks and then inked all the edges.  I glued the bottom to the side flaps and the envelope was done.  I’ll seal the top flap when I send the card.

Envelope

 

  • Cricut cartridges:  Creative Cards, Imagine Blossom, A Child’s Year
  • Ink & Chalk
  • Whimsy Stamps
  • Stickles

 

Cricut Create a Critter 2 Owl Witch Card

 

I was able to use my new Create a Critter 2 cartridge last night to make a card to participate in the latest challenge at Cooking With Cricut,  their Card Outreach Challenge.  The challenge is to make fun Halloween cards (no scary ones) for the I Feel the Love Project.

The “I Feel the Love” Project for September is to make Halloween Cards to be given to the kids who live at Casa Pacifica.   Casa Pacifica serves abused and neglected children and adolescents, and those with severe emotional, social, behavioral, and mental health challenges on California’s Central Coast.  Each year the facility has an amazing Halloween party for the kids. It is IFTL’s goal to send a card to each of the 70 children who reside there. (For more information about Casa Pacifica please visit their website.)
I laid out my card in Cricut Craft Room, cutting the owl at 3″.  The owl’s body was printed and cut on my Imagine, using the Bubblegum Stripes cartridge for the small purple stripes.  I did not use CCR for this step, as it still is not compatible with the Imagine.  I embossed the small tummy piece with the Cuttlebug Swiss Dots embossing folder.
For the owl’s eye, I hid the cut that forms the pupil in CCR.  On the mat in CCR, the circles look perfectly round.  But when I cut the eyes with my Expression, they did not come out round.   I had what looked like a cross-eyed owl.  So I took black paint  and a stylus (you can also use the round end of a paintbrush), dipped the stylus into the paint and then formed black circles on the white part of the eye.  Once the paint dried, I put a white highlight on the black dot.
I added a moon behind the owl, which is a circle that I also cut at 3″.  I embossed the moon with a new Cuttlebug folder I recently got, the bat folder from the Midnight Hauntings set.  The phrase was cut at 1″.  Because of the small size of the phrase, I cut it out of vinyl.  The Cricut easily cuts vinyl.  Vinyl is great for small pieces because it already has adhesive, so you don’t have to fuss trying to put glue on them.
I added Stickles to the band and buckle on the hat.
For the inside of the card, I lined it with a couple of pieces of patterned paper.  I cut the pumpkin treat bag and candy piece, also from Create a Critter 2, at 1.5″.  I cut the shadow layer from cardstock and the black and orange layers from vinyl.
The background paper and print paper inside my card are from a K & Company Halloween collection that came out a year or so ago.  I picked it up on sale and don’t remember exactly when I bought it.
  • Cricut cartridges:  Create a Critter 2, Imagine Bubblegum Stripes
  • Cuttlebug:  Midnight Hauntings embossing folder set
  • K & Company Halloween paper pad
  • Stickles

Wee Wee Wee!! Pig With Pinwheels Shaped Card

I wanted to make a birthday card for my sister-in-law and I wanted to create one that was very whimsical — and I hope I succeeded.  I enjoy making shaped cards and when I found the All Shaped Up Challenge on Bitten by the Bug 2, the idea for my card was hatched.

I love the pig with the pinwheels in the Geico commercials.  You can’t help but smile when one comes on TV, and I have been wanting to do something along those lines for while now.   I decided to make my pig a girly girl and give her a fancy party dress, complete with a birthday party hat.

I started laying out my design in Cricut Craft Room.  Unfortunately, the program still has issues and I ran into some of them while creating this card — and ended up wasting time.  I find CCR so frustrating at times that bad words will just start popping out of my mouth.

When I got ready to cut my card, Cricut Craft Room was down and I could not log in.  I kept getting a message that the program couldn’t connect to the internet.   I kept trying and after an hour or so, I was able to log in and cut my layers.

All the solid color cardstock is from Bazzill, except for the glitter cardstock on the hat — that is from Core’dinations. The patterned paper I printed on the Imagine using the Blast Off cartridge.

I used Create a Critter for the pig and pinwheels and B is for Boy, a Lite cartridge, for the “wee” words.  I welded them all together to form the base of the card.  I used the Swiss Dots folder and my Cuttlebug to emboss the words.  I found some eyelash-type yarn at Joann’s that I used for her dress, layering it so it looks like a fringe dress — reminds me of a flapper dress.  I added some pearls at the neckline and a bow on both the dress and hat.  I used Stickles on the center of the pinwheels.

The inside of the card features a computer-generated sentiment.

I hope this little piggy card brings a smile to my sister-in-law’s face.  I need to make an envelope so I can get it in the mail.  Since it is a over-sized card, I will probably send it in a padded envelope.

I am also entering this card into the following challenges:

Cricut Chirp Challenge #6 – Create a Critter Craft:  use any animal Cricut cut on your project

Scrappy Moms Stamps – Terrific Tuesday Challenge – Shape Up:  create a shape project

  • Cricut cartridges:   B is for Boy Lite, Blast Off (Imagine), Create a Critter
  • Cuttlebug:  Swiss Dots embossing folder
  • Bazzill cardstock
  • Stickles
  • Yarn, pearls, ribbon