Flowers Made With New EK Success Dimensional Punch

August 8, 2011 by 2 Comments

 

Boy, it has been a long time since I posted anything on our poor ol’ blog.  I have been busy with the embroidery business, which is such a blessing after being so slow last year. 

I want to share a couple of flowers I made with one of the new EK Success Dimensional Punches.  EK released four new punches for making flowers and I was able to find them at Joann’s.  The new punches are:  Doily Petals, Gerber Daisy, Dahlia, and Carnation.  The one I used to make these two flowers is the Doily Petals punch.  These are the first two flowers I made — I haven’t had a chance to try the other punches yet.  But after making these flowers, I am looking forward to playing with the other punches.

Before trying to make a flower, I watched a couple of videos showing how to use these new punches.  The video I watched on a blog called Tinker Planet really helped.  She showed making a flower using the directions given on the back of the punch package and then showed her method.  I made the blue flower using her method. 

I cut two strips from a scrap of 12″ K & Company paper for my petals.  I put tape at the bottom of each strip using my ATG gun, just as shown in the video.  I wrapped my two strips around a chopstick.  But instead of gluing a pearl or gem in the center of the flower, I cut another strip of petals and used just six petals from this strip.  I wrapped them tightly around a very small paint brush and then glued them in the center of my previous two strips, to hide the hole in the middle. 

As in the video, I pulled all my petals down — just like peeling a banana.  Here is a picture showing the side view of the flower.

 

The second flower is my creation.  When I was looking at the strips of petals after punching them, I was reminded of a Spellbinders flower die that I have.  The only difference is that it is a round die — so the petals are all nicely in a circle.  I wondered how I could get the petals on the strip into a circle. 

I thought maybe I could score the strip and then fold it, like making a rosette, and get it into a circle.  I put the strip on my Martha Stewart score board and started scoring a line on each petal.  I scored right next to where the petal joined the bottom strip, scoring  just once on each petal — but always scoring on the same side of each petal. 

Then I folded along each score line and folded the petal until it was almost touching the next petal.  When I got to the end of the 12″ strip, I joined the ends.  Then I punched out a 1″ circle and glued my rosette onto it.  I made two layers and glued them together.  Then I took a third circle and put in the center of the flower and added some Flower Soft around the edges. 

This flower is also cut from a scrap of K & Company paper.  I guess it looks OK — it reminds me of a sunflower.  And here is a side view so you can see the layers and dimension.

  • EK Success Doily Petals Dimensional Punch
  • K & Company paper
  • Flower Soft
Filed Under: EK Success Punches, News, Supplies Tagged With: , ,

Father’s Day Card From The Smoochy Poochy

June 20, 2011 by 4 Comments

 

I decided to make my dear hubby a Father’s Day card from our dog.  Her name is Fifi and she is a rescue dog — part Pomeranian and part Chihuahua.  She is such a daddy’s girl that I figured he would enjoy it.

I call her our Smoochy Poochy because she loves to give kisses.  She also loves toys — her favorites are the fake fur bones with squeakers inside.  She has an assortment of them in all different types of prints — from giraffe to leopard prints. 

I made this card to enter into two challenges.  The weekly challenge at the Cricut Circle Blog is a sketch challenge, so I followed that for the layout of my card. 

The latest challenge at Cooking With Cricut is a Father’s Day related project that includes a Cricut cut.  I used several Cricut cuts on this card.

I couldn’t find a dog that looked like Fifi, so I opted for this cutie on the Paper Pups cartridge.  I chose this one because the dog is on its back and Fifi has a tendency to go “belly up” while she is sleeping.  The dog is lying on an envelope that she has so thoughtfully placed one of her squeaky bones inside for Dad.  The ribbon and bones are from Paper Pups also.

I used Doodlecharms for the envelope, Beyond Birthdays for “Dad” and Sans Serif for “#1”. 

The solid cardstock is Bazzill and the printed paper is all from Basic Grey — their Lauderdale collection.

For the inside of the card, I used Paisley for the “xoxo” and Simply Charmed for the “Happy Father’s Day” sentiment.  I added another bone inside.

  • Cricut cartridges used:  Beyond Birthdays, Doodlecharms, Paisley, Paper Pups, Sans Serif, Simply Charmed
  • Bazzill cardstock
  • Basic Grey — Lauderdale collection
Filed Under: Beyond Birthdays, Card Challenges, Cards and Projects, Cartridges, Circle Challenge, Cooking With Cricut, Cricut, Doodlecharms, Paisley, Paper Pups, Sans Serif, Simply Charmed Tagged With: , , , , ,

Ice Cream Shop Card for Cricut Circle Weekly Challenge

June 7, 2011 by 4 Comments

 

Weekly Challenge #33 over at the Cricut Circle Blog is called the Sweet Summertime Challenge.  You have to incorporate the shape of your favorite summertime treat and use a stamp somewhere on your project.

My summertime treat is easy — it’s the same treat I love all year long — ice cream!!  That being said, I knew right away what my card was going to have on it.  But I decided that I would not only include an ice cream cone but also the ice cream shop.

The lastest exclusive cartridge for Cricut Circle members is Pop-Up Neighborhood.  I was looking through the handbook and really liked some of the buildings.  While I didn’t use the pop-up feature on this card, I did take the bakery and turned it into an ice cream shop.

In Design Studio, I laid out two of the bakery shadow shapes and welded them together at the top.   I remembered the cute little hippo from Birthday Bash, who is blissfully running with her ice cream cone, and knew I wanted her on my card too.  So I laid out the hippo shape onto my base and welded that also.

I cut the shapes from the Sweet Stack by Die Cuts With A View.  The solid color cardstock is from Bazzill.  I used just the two cartridges — Birthday Bash and Pop-Up Neighborhood.   Oops, I just remembered a third cartridge that I used — the Lite cartridge Twinkle Toes.  I cut the banner for the shop name from it.

For the windows on my ice cream shop, I used graphics from Provo Craft — from their pccrafter.com site.  I thought they were perfect with my design.  I used a stamp to do the name of the shop.  I found a clear stamp in a set that I bought from K & Company that said “The Scoop” and when I saw it I knew that would be the name.

I used the Cuttlebug on the front door, the Distressed Stripes folder, and also on the ice cream cone, the Mesh Texture folder.  I needed something with a small pattern because the ice cream cone on the front of the card is quite small and this folder was great.  It gives the look of a waffle cone.  I used coarse glitter on the ice cream itself and red Stickles for the cherry on top.

Front3

This is a happy and fun creation and when I look at my card I can’t help but think of a book Erin had as a child.  It was called Yummers! and featured Miss Emily (a pig) and Eugene (a turtle).  When I look at the pink hippo, she just looks like she is running along thinking, yummers!!

The patterned paper on the inside of the card is from daisyd’s.  I made another ice cream cone, this time a little larger, to adhere to a corner.

  • Cricut Design Studio
  • Cricut cartridges:  Birthday Bash, Pop-Up Neighborhood, Twinkle Toes
  • Cuttlebug folders:  Distressed Stripes and Mesh Texture
  • DCWV — Sweet Stack
  • Bazzill solid cardstock
  • Coarse glitter
  • Red Stickles
Filed Under: Birthday Bash, Card Challenges, Cards and Projects, Circle Challenge, Cricut, Pop-Up Neighborhood, Rubber Stamps, Stickles, Twinkle Toes (Lite) Tagged With: , , , , , , ,

Vintage Birthday Card for Cricut Circle Blog’s Monthly Challenge

May 30, 2011 by 4 Comments

 

Here I am, getting another project submitted with just a few hours to spare.  I guess I work better with deadlines closing in on me, although I do not care for the stress.  But who can I blame for procrastinating?  Yep, no one but me!

I decided to make a birthday card for my niece and this is my first time trying to make something that looks vintage.  I love the look of vintage but didn’t know how well I would do trying to create it.  I am happy with how it turned out, especially for a first try.

The paper I chose is the reason I went for the vintage look.  I picked up a pad of paper by Bo Bunny when I was shopping last week.  It is the Gabrielle Collection and there are some beautiful designs in it. 

The monthly challenge for May at the Cricut Circle is the Tic Tac Toe Challenge.  The object is to pick three prompts in a row from a tic tac toe grid and to include at least two Cricut cuts.

I chose a diagnoal row, going from the bottom left to the right top — which consisted of:  use a cut of a flower shape, use a ruffle, and use some buttons.

Because the paper is so pretty, I decided to use a frame around one of the designs.  I cut the frame from the Elegant Edges Cricut cartridge.  I made my ruffle from a piece of seam binding and laid down a piece of lace on the paper before adding the ruffle.  The pearls on the ruffle are actually white buttons that I colored with my Copics.  I cut the shanks off the button before gluing them on the ruffle.

The flowers were the most time-consuming part of my card.  I cut them out of plain off-white cardstock using my Accent Essentials cartridge.  I inked all the edges and then formed the cuts into roses.  I sprayed them with Glimmer Mist — sure wish the sparkle showed up in the pictures. 

I cut the leaves from the same off-white cardstock using the Picturesque cartridge, inked them green and then ran them through my Cuttlebug using the Swiss Dots folder.  The butterfly is from the Martha Stewart Elegant Cake Art cartridge.  I found a button in my stash that matched the butterfly beautifully.  I added some Memory Thread to the button and glued it on the body of the butterfly.  On the lacy layer of the butterfly, I added some sparkle using Glossy Accents and Diamond Dust.  I also used Distress Stickles on its body.

I cut some tickets using Wall Decor & More and inked them a light coral color.  I cut the tickets at 2″ and they fit the stamp set perfectly.  I then stamped them with a stamp set from Autumn Leaves called Ticketed. 

The inside of the card features a different piece of the Bo Bunny paper and another ticket.

I used lots of foam dots on this card.  Here is a photo showing a side view so you can get an idea of the dimension that this card has.

Since I can’t put this card into a normal envelope, I made a box to hold it.  But I need to take a picture of the box.  I will post the picture once I take it. 

I’m back with some pics of the box.  I ended up adding my niece’s name to the top of the box, which I cut from Storybook.

 

  • Bo Bunny – Gabrielle Collection
  • Cricut cartridges used:  Accent Essentials, Elegant Edges, Martha Stewart Elegant Cake Art, Picturesque, Wall Decor & More
  • Cuttlebug folder – Swiss Dots
  • Glimmer Mist
  • Seam binding
  • Stickles
  • Autumn Leaves stamps – Ticketed
  • DMC Memory Thread
  • Glossy Accents
  • Diamond Dust
  • Buttons from stash
Filed Under: Accent Essentials, Card Challenges, Cards and Projects, Circle Challenge, Copics, Cricut, Elegant Edges, Martha Stewart Elegant Cake Art, Picturesque, Rubber Stamps, Storybook, Wall Decor & More Tagged With: , , , ,

Duffy the Disney Bear Celebrates Cinco de Mayo Layout

May 26, 2011 by 1 Comment

Whoo hoo — I’m back with my second layout.  I haven’t posted in quite some time, but I am so excited because my first layout won in the Provocraft contest that was held in conjunction with the launch of the new Cricut Expression E2.  I was the next-to-the-last winner announced on Provo’s Facebook page and couldn’t believe my eyes when I saw my layout pictured on their wall.

This is my first “major award”  — and what did I win?……A new Cricut Expression E2 — whoooo hoooo.  It has already arrived and I hope to start playing with it soon.  Thank you so much Provo Craft!!

I created this layout to enter in the latest Cricut Circle Blog weekly challenge, which ends in just a few hours.  This is a sketch challenge and you have to follow the sketch posted on the blog.  It always takes me time to come up with inspiration, particularly when doing layouts.  Hopefully as I gain more experience the ideas will come more quickly. Now for a little background info about this layout.  Erin (my daughter and co-conspirator on this blog) is currently living in Taiwain and is a huge Disney fan.   She has visited all five parks many times.  She got bit by the Duffy Bear bug while on a visit to Tokyo Disneyland.  Duffy is Mickey Mouse’s teddy bear, sewn by Minnie Mouse to keep Mickey company while traveling.  Notice his face is shaped like Mickey’s head.  While Duffy was exclusive to Tokyo Sea, he is now being featured at Disney World, Disney California Adventure, and Hong Kong Disneyland. Erin brought me a Duffy and Shellie May (the girl version, and still only available at Tokyo Sea) on one of her visit’s home.  She has since given me a Duffy bear from Hong Kong Disneyland, and I added two of my own from California Adventure.  While Erin’s bears have traveled all over the world (Japan, Hong Kong, France, the Netherlands, Belgium, Germany, Switzerland, Luxembourg, Tahiti, Belize, to name a few), my bears are content to reside mainly in California. Living in Taiwain, Erin is about 15 hours ahead of our time here in California.  For Cinco de Mayo, she posted pictures of one of her Duffy bears celebrating Cinco de Mayo on her Disney travel blog, Pooh’s Travels.   She dressed him in his outfit from Mexico and shows him sitting at the dinner table with a meal of chicken taquitos and mango margaritas spread out before him.  As soon as I saw her post I knew I had to do something special with one of my Duffy bears for Cinco de Mayo so I could send pictures to Erin. As my hubby and I had plans to go to Acapulco restaurant for dinner on May 5, I dressed my bear in his serape and sombrero and he tagged along.  Yep, we took a bear to dinner!  The older I get the less I seem to care if people think I’m crazy! I took a couple of pictures of him sitting in the booth with chips and salsa.  And my hubby is the one who put the chip in Duffy’s paw and moved the salsa close to him.  But the coolest part was that the restaurant had this beautiful young lady acting as a greeter for Cinco de Mayo and she was all dressed up in a gorgeous outfit from Mexico.  On the way out of the restaurant I asked her if Duffy could take a picture with her and she obliged.  I couldn’t wait to get home and send the pictures to Erin. When I first saw the pictures, I thought Duffy looked like he was sitting in a cantina and a song immediately came to mind — El Paso, by Marty Robbins.  So I included the first two verses when I sent Erin the pics and decided to include them on my layout too.

The patterned paper I used on this layout is from Basic Grey, their Life of the Party collection.  The cartridges I used are Elegant Edges for the stamped background mat and the diamond trim at the bottom of the pictures, Old West for the title, Mickey & Friends for the Mickey heads (I welded one to a rectangle for the tag that pulls out at the top), and Wild Card for the sombrero.

  • Basic Grey — Life of the Party
  • Cricut cartridges:  Elegant Edges, George & Basic Shapes, Mickey & Friends, Old West, Wild Card
  • Stickles
Filed Under: Cartridges, Circle Challenge, Cricut, Elegant Edges, George and Basic Shapes, Layouts, Mickey & Friends, Old West, Stickles, Wild Card Tagged With: , ,

My Craft Space

May 14, 2011 by 2 Comments

There is a fun giveaway going on in the Cricut Circle to celebrate National Scrapbooking Day.  All you have to do to enter is post a picture of yourself in your craft space.

My craft space is a bedroom where I have my embroidery business set up.  I don’t have enough room to leave all my scrapbooking supplies out, so I have to put them away each time.  But it doesn’t take too long for me to set them up, so that is a good thing.

I set my Cricut Expression on my hooping table — where I hoop the garments to embroider.  Even though I am sitting in the picture, I stand when I use this table. 

That is one of my embroidery machines to my side.  It is my large machine, a 15 needle, single-head machine.  On the counter on the other wall, out of view, is a smaller machine, a 12 needle. 

I hate pictures of myself — I look so dorky!  This one is no different.  If I am posting a picture of myself, that pretty well says that there are some really neat prizes being given away. 

Filed Under: Cricut

Surprise Birthday Layout — My First Layout

April 22, 2011 by 2 Comments

 

This is my first layout ever — and I really struggled with it.  Up to this point I have just made cards with my Cricut.  I have no trouble deciding and laying out what I want on my card fronts, but doing a 12″ x 12″ page proved to be a challenge. 

I wanted everything on my layout to flow and look like it was put there for a purpose.  I even went to the Cricut Circle Blog and watched their tutorial again on how to do a layout.  After watching the video I felt I had a better grasp of things, but once I started cutting I wasn’t so sure. 

The patterned paper is from SEI — their Happy Day collection.  Since I had the paper pad in my stash and knew I wanted to use it, that is the only thing I was certain about on this project.  Once I got my background paper laid out and the banner done, then the rest sort of came together.   I laid out everything in Design Studio before I started cutting anything. 

The large scallop square background is cut from the Cindy Loo cartridge.  The banner, the cat jumping out of the cake, and the gifts are all from Birthday Bash.  The streamers are from Celebrations and all the circles are from George. 

I think I cut the center circle at 7″.  Then I measured and found the center and started slicing the circle, but didn’t cut it all the way from edge to edge.  I left about 1/2″ intact at each edge of the circumference.  I glued it to the layout right-side down, so that when I pulled back the slices the pattern paper showed.  Before gluing each of the points down, I cut a ring of solid turquoise cardstock to cover the raw edges of my sliced circle.  I added some white rick rack to the ring.  Then I put adhesive on each of the points of the slices and adhered them to my layout. 

Side view so you can see the dimension of the layout

This was my first time making rosettes and I used my Martha Stewart scoreboard to make the pleats.  That was a lot of fun, except that making those score marks every 1/4″ is hard on arthritic hands. 

I used lots of Stickles — I coated all the letters in the banner.  I think the color I used was copper.  I added Stickles to the gifts, the cake, and all the streamers got coated in them.  I used DMC Memory Thread to string up my banner and for the center of the button on the rosette.  I love that stuff — it’s so easy to work with.

Close up of the title banner

Close up of the cat in the cake

Close up of the gifts

The little “birthday bash” tag was cut with my Cuttlebug using the Tiny Tags die.  I did the sentiment on the computer.  Oh, also did lots of inking and doodling and stitched the turquoise cardstock to the pink cardstock with my sewing machine. 

  • SEI Happy Day paper
  • Cricut cartridges:  Birthday Bash, Celebrations, Cindy Loo, George & Basic Shapes
  • Cuttlebug — Tiny Tags die
  • Stickles
  • DMC Memory Thread
Filed Under: Birthday Bash, Cartridges, Celebrations, Cindy Loo, Cricut, Cuttlebug, George and Basic Shapes, Layouts Tagged With: , , ,

Easter Bunny Inside His Jelly Bean Seed Packet Card

April 15, 2011 by 10 Comments

 

This was a fun card to make.  I wanted to make an Easter card so I could enter it in Jitterbuggin’s Spring Fling contest.  We had extra time to complete this challenge, but I waited until the last minute and am getting this in just under the wire.  It took a while for me to take my concept and come up with a finished project.   This time the challenge is open to voting, so that part is new to me. 

I was inspired by the movie Hop — I loved it and can’t wait for it to come out on DVD.  But my little bunny has to use seeds for his beans as he does not have the talent EB does when it comes to producing jelly beans.

I was a member of PC Hug Club for many years and received some very cute clip art each month.  Because I have such a large collection and never use it, I decided I was going to print my own paper to make this card.  All the background prints are images that I printed on an inkjet printer.  I really like using the clip art because I can resize it — so a 12″ x 12″ background can be reduced to 6″ x 6″ to make a card.  The size of the print becomes smaller too, so it is perfect for cardmaking. 

Fantabulous Cricut has a challenge called Do the Bunny Hop! this week that I will enter this card in.  You have to create a project using a rabbit or chick.

Also, at Cooking With Cricut, their challenge is called Cash in Your Stash and you are supposed to use things in your stash — items that you have had for at least a year.  My clip art collection certainly qualifies, and I also used scraps that I have had for ages to make the bunny and the grass.

I made the seed packet in Adobe Illustrator.  I am such a beginner using that program and was thrilled when I actually made something with it.  I made it a complete packet so I could slip the bunny inside. 

Making the jelly beans was probably the most time-consuming aspect of the card.  I first did an online search to see if I could find a Cricut cut file for a jelly bean as I was pretty sure there were no jelly beans on any of the Cricut cartridges.  I found a post where someone said they made a jelly bean using the George and Basic Shapes cartridge, using the crescent and heart shapes.    I used the same shapes and laid the beans out in Design Studio.  I cut the jelly beans from white cardstock and then colored them with Copic markers.  I applied two layers of Glossy Accents to give the beans their shine. 

The bunny is from the Paper Doll Dress Up cartridge — he’s the bunny from the magician’s costume.  I made a bow for him from seam binding that I spritzed with Glimmer Mist.  The grass is from Create a Critter.  I cut two layers of the grass for each clump so the jelly beans could be seen growing between the layers.  After I placed the bunny inside the seed packet, I pop dotted the entire piece on the front of the card.

Side view showing some of the dimension of the card.

For the inside of the card, I used a stamp from a clear set that I picked up at a scrapbooking expo several months ago.  It came with the rhinestones that I put inside the stamped flowers.  I added another clump of grass with some more jelly beans.

 

  • Cricut cartridges:  George & Basic Shapes, Create a Critter, Paper Doll Dress Up
  • Cricut Design Studio
  • PC Hug Club clip art
  • Copic markers
  • Glimmer Mist
  • Rayon seam binding

Challenges:

Jitterbuggin — Follow the sketch, make an Easter card and use a Cricut cut somewhere on your card.

Cooking With Cricut — Use stuff in your stash, items that you have had for a year or more.

Fantabulous Cricut — Use a bunny or chick in your project.

Filed Under: Card Challenges, Cards and Projects, Cartridges, Cooking With Cricut, Copics, Create a Critter, Cricut, George and Basic Shapes, Jitterbuggin, Paper Doll Dress Up Tagged With: , , ,

Happy Birthday Cupcake Card

March 23, 2011 by 7 Comments

Mom and I decided on Monday that we’d try to enter the Jitterbuggin’ sketch challenge this week to motivate me to craft more — and put my now organized room to use!   This has been a busy week work-wise as I just finished up four days of writing non-stop for a special charity travel blogging event that was taking place.  I finished off my last post this morning and while I am exhausted, I am happy I participated.

Unfortunately, I didn’t leave myself much time to get a card done for the challenge so I spent the entire day crafting.  Since my birthday is rolling around again in two weeks, I joked with my husband that since we don’t really know where to get English birthday cards here, I will just make one for myself!

My Birthday Card

Making my own birthday card gave me an opportunity to use another recently purchased Taiwan stamp.  I love these three birds as they seem to coordinate with the 3 Birds on Parade Cricut cartridge!  I colored the birds with Copic Sketch Markers (well, tried anyways).

Close up detail of the Bday card

All the papers for this card were loose stock that I must have picked up at Michael’s or Joann’s at some point.  I ended up using four Cricut cartridges to make all the cuts on this card — it’s been so long since I did this much cutting with the Cricut, it was almost like starting over.

For all the rectangles and squares, I used Plantin Schoolbook again.  On the corners, I used wavy scissors to give one edge some contour.  The green rectangle “birthday present” is embossed with the Cuttlebug.  On each of the corners, I added buttons and green memory thread.  The stripes on the card are made using one of the $1 ribbon spools from Michael’s.

The layered flower cuts at the bottom are from the Sweet Treats cartridge.  The bow on the present is cut from the Birthday Bash cartridge.  I embossed it and then used dark purple ink to make the hearts on the bow stand out.  The small bird with the cupcake in the flower is from 3 Birds on Parade.  I cut several layers of each and used foam dots to pop them up.

Inside of the Bday card

On the inside, the “You Take the Cake” is from 3 Birds on Parade as well.  I added the little birdie letters from 3 Birds on Parade to make it “cupcake”.  The cupcake brad is from Michael’s and is just glued on to the popped up letters.

Inside detail on the card

After completing it and sharing it with Mom on Skype, I found out about several more challenges I could enter with it!  For this card, I am entering:

Jitterbuggin’ — It’s Not Easy Being Green

Fantabulous Cricut – Challenge #52 – Happy Birthday

Cuttlebug Spot — Buttons…Buttons Everywhere

Filed Under: 3 Birds on Parade, Birthday Bash, Card Challenges, Cards and Projects, Cartridges, Cricut, Cuttlebug Spot, FCCB, Jitterbuggin, Plantin Schoolbook

Jitterbuggin’ Challenge – Spring Butterfly Card

March 23, 2011 by 3 Comments

This week’s challenge over at Jitterbuggin’ is to follow the sketch, use green on your card and, of course, use your Cricut.  When I was planning this card in my head, it was going to be lavender.  But when I started picking out my paper, it suddenly became mostly green.  I wanted a card that looked like spring and when I saw this paper, I knew I wanted to go with daisies. 

I have sewn most of my life, and when Erin was young I made most of her clothes.  I loved making frilly dresses for her for Easter and dotted swiss was a favorite fabric.  The corners on my card are my papercrafting version of dotted swiss and lace. 

The daisy and dot print papers are from a pack by Martha Stewart that I got on clearance at Michaels some time ago.  The solid cardstock is Bazzill.  The corners are made from vellum and I ran them through my Cuttlebug using the Swiss Dots embossing folder.  I stitched some lace on the edge of the corners and then stitched the corners to the card.  I used my Cuttlebug again to cut some  fancy small corners out of white Bazzill that I glued in the uppermost part of the vellum corners.  The die I used for this is from a 4-pack called Vintage.

I used my Cricut and cut the fence and daisies from the Bloom Lite cartridge.  I cut everything out twice so I could layer them.  I ran the fence section through the Cuttlebug using the Distress Stripes folder so it would look like wood.  I inked the edges of all the cuts and used yellow Flower Soft in the center of the daisies.  The butterfly is from Graphically Speaking and I cut three layers, the top layer being vellum.  I used DMC Memory Thread for the antennae.  This was my first time using it and I love how easy it is to work with.  I pop-dotted the butterfly to the front of the card.

Close-up of front

When I cut the flowers for the front of the card, I cut extras so I could use them inside. 

I found another challenge that my card qualifies for, so I am very excited.  It is always nice when you can bundle challenges together.  This newest challenge is at the Crafty Creations Challenge Blog and is called In Stitches.  Your project has to include some stitching. 

  • Bazzill cardstock
  • Martha Stewart paper
  • Vellum
  • Cricut Design Studio
  • Cricut cartridges:  Bloom Lite and Graphically Speaking
  • Cuttlebug embossing folders:  Distressed Stripes and Swiss Dots
  • Cuttlebug Vintage die
  • Flower Soft
  • DMC Memory Thread
Filed Under: Bloom (Lite), Card Challenges, Cards and Projects, Cartridges, Cricut, Graphically Speaking, Jitterbuggin, Uncategorized Tagged With: , , , , ,
« Previous Page
Next Page »