Eyelash Yarn and Tutorial on How to Make Your Own Using Grosgrain Ribbon

September 14, 2012 by 2 Comments

 

 

I received a couples on inquires on my Pig Card With Pinwheels asking what eyelash yarn is.  Eyelash yarn is a novelty yarn that has long strands (that resemble hair) coming out from the main thread.  It looks like a strand of eyelashes.  The yarn I used for the pink fringe dress on the pig is from Bernat and is called Boa.  I found it at my local Joann’s store.

Many years ago when I was into making dolls and teddy bears, I learned a technique to make something similar to eyelash yarn using grosgrain ribbon.  I used this technique using wide grosgrain ribbon to make eyelashes for some of my critters.  I simply glued the eyelash ribbon behind the eye buttons and had nice, long black lashes.

To make a fringe from grosgrain ribbon, cut a strip of ribbon.

You will notice that the ribbon has a bound edge on both the upper and lower edges.  Take your scissors and trim one edge off the ribbon.  You want to do this on just the one edge.

I then take a pin and start raveling out the threads that run the length of the piece of ribbon.  I usually do just a couple at a time, and then repeat until all the threads are pulled out.

Once you have removed all the threads, your ribbon should look like this.  Notice that the color is not as bright as what you started out with.  The brighter color can be seen on the top strip of the ribbon.

Then you can cut your ribbon into pieces and lay them on top of each other to fill in your cut shape.

For the pig’s dress, I layered all my yarn on top of each other on the cut Cricut shape, glued it down and then turned the piece over and trimmed the yarn to the shape of the dress.

Filed Under: Cards and Projects, News, Tutorials

Wee Wee Wee!! Pig With Pinwheels Shaped Card

September 9, 2012 by 12 Comments

I wanted to make a birthday card for my sister-in-law and I wanted to create one that was very whimsical — and I hope I succeeded.  I enjoy making shaped cards and when I found the All Shaped Up Challenge on Bitten by the Bug 2, the idea for my card was hatched.

I love the pig with the pinwheels in the Geico commercials.  You can’t help but smile when one comes on TV, and I have been wanting to do something along those lines for while now.   I decided to make my pig a girly girl and give her a fancy party dress, complete with a birthday party hat.

I started laying out my design in Cricut Craft Room.  Unfortunately, the program still has issues and I ran into some of them while creating this card — and ended up wasting time.  I find CCR so frustrating at times that bad words will just start popping out of my mouth.

When I got ready to cut my card, Cricut Craft Room was down and I could not log in.  I kept getting a message that the program couldn’t connect to the internet.   I kept trying and after an hour or so, I was able to log in and cut my layers.

All the solid color cardstock is from Bazzill, except for the glitter cardstock on the hat — that is from Core’dinations. The patterned paper I printed on the Imagine using the Blast Off cartridge.

I used Create a Critter for the pig and pinwheels and B is for Boy, a Lite cartridge, for the “wee” words.  I welded them all together to form the base of the card.  I used the Swiss Dots folder and my Cuttlebug to emboss the words.  I found some eyelash-type yarn at Joann’s that I used for her dress, layering it so it looks like a fringe dress — reminds me of a flapper dress.  I added some pearls at the neckline and a bow on both the dress and hat.  I used Stickles on the center of the pinwheels.

The inside of the card features a computer-generated sentiment.

I hope this little piggy card brings a smile to my sister-in-law’s face.  I need to make an envelope so I can get it in the mail.  Since it is a over-sized card, I will probably send it in a padded envelope.

I am also entering this card into the following challenges:

Cricut Chirp Challenge #6 – Create a Critter Craft:  use any animal Cricut cut on your project

Scrappy Moms Stamps – Terrific Tuesday Challenge – Shape Up:  create a shape project

  • Cricut cartridges:   B is for Boy Lite, Blast Off (Imagine), Create a Critter
  • Cuttlebug:  Swiss Dots embossing folder
  • Bazzill cardstock
  • Stickles
  • Yarn, pearls, ribbon

Filed Under: B is for Boy, Bitten by the Bug 2, Blast Off, Card Challenges, Cards and Projects, Create a Critter, Cricut, Cuttlebug, Stickles Tagged With: , , , , , , , , , ,

Wild About You Onesie Gift Set Using Cricut Create a Critter 2

September 3, 2012 by 4 Comments

 

One of the more popular Cricut cartridges surely must be Create a Critter.  Provo Craft is giving users of Cricut Craft Room a sneak peak of one of their newest cartridges by making five cuts from Create a Critter 2 available for free. There is also a contest, which ends on September 5,  where you can enter your projects using these latest designs through the Cricut Project Center.

My project is a onesie gift set that includes a black onesie decorated with the lion and phrase designs from Create a Critter 2.  All were cut from heat transfer vinyl.  I constructed a box from Sweet Tooth Boxes and made a small gift card using the bird that is on the Icon tab of the lion feature on Create a Critter 2.

When using heat transfer vinyl, it is important to remember that you must mirror (flip) your images in Craft Room because you are cutting the back of the vinyl.  Then when you iron it on your garment everything is facing the correct way and you can read your phrases.

“Wild about U”  is cut from a holographic vinyl that I picked up years ago at a trade show — long before I knew what a Cricut was.   I fell in love with the sparkly rainbow colors and brought a roll home with me.  Unfortunately the vinyl did not come with application instructions, so I did some test runs before applying it on the onesie.  My first attempt at ironing it on produced negative results as I was getting it too hot.  I didn’t realize it and started increasing the time I was pressing, getting even worse results.  I finally dialed back on the heat and the time to get proper application.

The lion is cut from a vinyl that can be peeled hot or cold.  Because he has four layers, I applied him first.  I put down the first layer and pressed for only 4 seconds, immediately peeling off the backing.  I let that layer cool and then added the next.  Again, I pressed for 4 seconds and peeled.  I did this until all four layers were down.

When doing layers, you have to remember to cover up the vinyl that has already been applied and is no longer protected by the clear film.  I use a teflon sheet to cover my design before pressing each layer.

After the lion and the “about” from the phrase were in place, I then added the holographic phrase and applied it.

The gift box is from Sweet Tooth Boxes.  I cut the box that begins on page 10 of the handbook, using just the bottom and lid.  I hid the cut-out area in the lid and then added the shadow feature of the lion — so my box has a lion window to tie in with the theme of the onesie.

I printed the zebra paper for the box lid using my Imagine.  I used a bright purplish cardstock and printed the stripes using the Teresa Collin’s Black & White cartridge.  This put a lot of black ink on the paper, so I used a blow dryer on it and then I let it dry for over an hour.  When I rubbed my fingers on it, the black was still smudging, so I gave it a coat of clear matte spray.

Because Cricut Craft Room does not work with the Imagine, I used my Imagine only to print the paper.  I then transferred the paper to my Expression and cut the lid.  I scored all the lines on the box and lid and assembled them, adding a layer of clear acrylic to form the window of the box.

A gift card was created using the shadow feature and welding two shapes together at the top of the head.  I used two Cuttlebug folders on the bird, Charles (a chevron design) and Swiss Dots.   I did the layers on both the front and back of the card, as I wasn’t sure which way I wanted him facing.

I added a white layer to the inside of the card so there would be a place to write a message.

To finish off the box, I dyed some seam binding using Tattered Angels Glimmer Mist and Adirondak Color Wash.  I scrunched it up while it was wet and let it dry.  Then I tied a bow and made a couple of ribbon roses to add in the middle.

  • Cricut Craft Room:  Create a Critter 2, Sweet Tooth Boxes
  • Cricut Imagine:  Teresa Collin’s Black & White cartridge
  • Cricut Expression
  • Cuttlebug:  Charles and Swiss Dots
  • Tattered Angels Glimmer Mist
  • Adirondak Color Wash

Filed Under: Cards and Projects, Challenges, Create a Critter 2, Cricut, Cuttlebug, Sweet Tooth Boxes Tagged With: , , , , ,

Showering Thanks Elephant Card

August 26, 2012 by 10 Comments

 

This week I was able to make a card to enter into two challenges.  The first is over at Bitten by the Bug 2 for their Elephantly Speaking challenge. The requirement is to use an elephant from any Cricut cartridge — we can chose any theme we want.

The second challenge is at Cooking With Cricut, and this week it’s pretty special because they are celebrating their 100th challenge.  They are doing a surprise thank you for their leader, Melin, and ask that you submit a thank you card to enter the challenge.

My card is approximately 4″ x 9″, made to fit inside a #10 envelope.  All the paper and images for this card were printed and cut on the Imagine, using the Hey Diddle Diddle cartridge.  The only piece I did not cut on the Imagine is the scalloped border across the top, which I cut on my Expression.  I laid that piece out in Design Studio, welding together three scalloped pieces from Accent Essentials to form the border.

My card features an elephant from Everyday Paper Dolls cartridge.  I colored all the detail on my elephant with Copics. The eye is actually printed and then I hand cut it out.  I got the free file for the eyes from My Scrap Chick and was able to resize it small enough to fit.

The title is what lead to the inspiration for this card.  I found it on the Everyday Pop-Up cartridge and when I saw it, I thought of an elephant spraying water.  The style of the lettering reminded me of a circus-type font, so I thought it went well with my little pachyderm.

The spray of water is from the Cake Basics cartridge and the individual drops of water and the water splat are from Everyday Paper Dolls.  I added some Stickles to the water.  I kept the inside of the card simple, using some more water for accents.

  • Cricut cartridges:  Accent Essentials, Cake Basics, Everyday Paper Dolls, Everyday Pop-Up
  • Cricut Imagine:  Hey Diddle Diddle
  • Copics
  • Stickles
Filed Under: Accent Essentials, Bitten by the Bug 2, Cake Basics, Card Challenges, Cards and Projects, Cooking With Cricut, Copics, Everyday Paper Dolls, Everyday Pop-Up, Stickles Tagged With: , , ,

Pull the Udder One, You’re How Old?

August 12, 2012 by 7 Comments

What a stressful weekend — and we found out the hard way that stress can have an adverse effect on dogs too.  About two weeks ago we found an abandoned kitten in our backyard, and it had a cold.  We started feeding it and even got antibiotics from the vet to give it.  We also started contacting every cat rescue organization in our area and always got the same answer — they could not take in any more cats.

Yesterday around noon we took Fifi, our 10 year old rescue Pomeranian/Chihuahua mix, outside.  She does not like cats but we thought she had been tolerating the kitten being in the yard.  The kitten was becoming tame and yesterday it came up to Fifi and started wrapping itself around her.  I could instantly see that Fifi was stressing out.

We knew something was amiss because Fifi had been having some digestive issues.  Seeing her reaction to the cat, I was sure it was coming from stress.  After that incident, Fifi refused to go back in the backyard.  She would only go out in the front yard, which requires us taking her out on a leash.

When it came time for Fifi to eat, she did not finish her dinner.  We started keeping a close eye on her.  About an hour later she threw up.  Around 1 a.m. we knew something was seriously wrong so we took her to an emergency animal clinic.  Fifi had intestinal bleeding and a temperature of 105 (normal for dogs can be up to 102).   They started her on an IV, antibiotics and gave her some medication for her stomach.

The dr. said it is not uncommon for small dogs to get so stressed out that it causes intestinal bleeding.  We were able to talk to our regular vet today (even though it is Sunday) and she suggested we have the cat out of the yard when Fifi comes home.  We are hoping we get to bring her home around 7 p.m. tonight.

Luckily the animal shelter is open today and we planned on loading up the poor kitten and taking it in.  Steve called a rescue lady that he had talked with yesterday (before Fifi got so bad) and when she found out we were taking it to a shelter she came over and picked up the kitten.

So the kitten stressor is gone and we hope Fifi will come home and be able to recover completely.  I will be taking her to see her own vet tomorrow and hopefully gain some insight to keep this from happening again.  This has been such a huge ordeal on the whole family — we were trying so hard to find the kitten a home.  I had no idea we were harming our dog in the process.  I so wish everyone would spay and neuter their pets.

OK, now on to my card.  I was able to put this together but wasn’t sure I would get it posted in time for the challenge I am entering it in.  Luckily I made it with a few hours to spare.

I made this birthday card for the On the Farm Challenge at Bitten by the Bug 2, which requires you to use any farm animal cut from any Cricut cartridge.  I selected the girl milking the cow from the Country Life cartridge.   My main reason for choosing this cut was that I had a sentiment stamp that I thought would be perfect with it.  The sentiment is from a set by Elzybell, who sadly is no longer making them.

I printed the checked background paper on my Imagine, using the Best Friends cartridge.  The fence and sun are from Pooh & Friends.  I printed the wood design on the fence, again with my Imagine, using the Snapshot: Nature cartridge. The girl milking the cow and the sunflowers are from the Country Life cartridge.  The thought balloon with the sentiment is from Cuttin’ Up.  All cuts, with the exception of those printed on the Imagine, were made using scrap cardstock. The girl and cow, sentiment and the flowers are popped up using foam dots.

And to show I learned something from this challenge, let me tell you about my cow.  She is a Brown Swiss.  The breed originated in the mountains of northeast Switzerland and was declared a dairy breed in the United States in 1906.  I’m not sure that the dark brown marking on her back is accurate, but if not then my Brown Swiss has a dark chocolate beauty mark on her.

After seeing the card assembled, it makes me wonder if there are many women working around cows who wear pink boots!  Well, my milk maid likes her stylish pink boots.

For the inside of the card, I printed another square of checked paper on my Imagine and added some sunflowers to the lower corner.

  • Cricut cartridges:  Best Friends (Imagine), Country Life, Cuttin’ Up, Pooh & Friends, Snapshot: Nature (Imagine)
  • Elzybells stamps
Filed Under: Best Friends, Bitten by the Bug 2, Card Challenges, Cards and Projects, Country Life, Cricut, Cuttin' Up, Pooh & Friends, Rubber Stamps, Snapshot: Nature Tagged With: , ,

This is My Little Black Dress Onesie and Matching Card

July 29, 2012 by 10 Comments

 

Several months ago I bought some black onesies so I could decorate them using heat transfer vinyl.  I went on to other things and the onesies just sat — until Bitten by the Bug 2 posted their Fashion Challenge.  That was the push I needed to get the onesies done.  And when I finished with the onesies (I made a 6 mos size and a 12 mos size), I made a matching card.  Now I have a couple of gift sets ready when I need them.

 

I saw this phrase on a onesie on the Internet a long time ago and always thought it would be fun to do.  I cut all the vinyl with my Cricut, using Design Studio to lay out everything.  For the necklace, I brought a cut from the Paper Doll Dress Up cartridge into Design Studio to use as a guide.  I enlarged the design until it fit the neck of the onesie.  I then took circles from George and laid them along the contour of the necklace, making sure they touched so I could weld them. Once I had circles completely covering the necklace shape, I deleted the necklace so that all was left was a string of pearls.  I cut this from white flock vinyl, so it has a fuzzy feel to it.

I used a variety of cartridges for the letters — sort of felt like I was putting together a ransom note.  I used Don Juan for the “this is my” and “dress” cuts.  I used Forever Young for “black” and Graphically Speaking for “little”.  I cut these out of white and pink glitter vinyl.

When cutting heat transfer vinyl, you have to remember to mirror the images.  I had no problem mirroring the words  “little” and “black” —  just had to check the “flip shapes” button in Design Studio.  But because I was putting the other words together myself using individual letters, I was having issues getting the words to mirror.  I finally figured out if I typed the words in backwards and then checked the “flip shapes” button that it worked.

I used Life’s a Party for the onesie card.  I welded two of the shadow bases together at the shoulders.  I embossed the black layer using my Cuttlebug and a 5″ x 7″ folder from the Once Upon a Princess Companion Set that has little roses all over.

The label on the front of the onesie is from the Phrases cartridge.  Because the lettering is so thin, I cut it from pink vinyl and used transfer tape to put it on the scalloped ovals.  I added a couple of glittery flowers that I picked up at a Tuesday Morning store a while ago.  I used 3 white dot embellishments that I got in one of Joann’s $1 bins for the snaps on the onesie.

For the inside of the card, I cut a white layer and inked the edges and then I stamped an image from a stamp I have in my stash.

  • Cricut cartridges – Don Juan, Forever Young, George & Basic Shapes, Graphically Speaking, Life’s a Party, Phrases
  • Cuttlebug – Once Upon a Princess Companion Set
  • Heat transfer vinyl
  • Assorted embellishments
Filed Under: Bitten by the Bug 2, Card Challenges, Cards and Projects, Cartridges, Challenges, Cricut, Cuttlebug, Don Juan, Forever Young, Graphically Speaking, Life's a Party, Phrases Tagged With: , , ,

Bitten by the Bug 2

July 29, 2012 by Leave a Comment

A few days ago I found out my most recent project, the Diorama/Luminaria card, was chosen as Project of the Week at Bitten by the Bug 2  in their Window to the World Challenge.  I am so thrilled.  Thank you so much!!

They have a great design team and list a new challenge every Monday, so be sure and check them out.  I just completed my project for their challenge that ends today, so I am off to get busy writing so I can post it here.

 

 

Filed Under: Bitten by the Bug 2, Challenges

Enjoy the Season Winter Window Card Luminaria

July 20, 2012 by 13 Comments

I’m not sure what to call my latest project.  I like to think of it as a hybrid — a cross between a window and diorama card and a luminaria.

It all began with the Window to My World Challenge at Bitten by the Bug 2.  I knew immediately what window I wanted to use for this challenge — the cute little dog and cat looking out the window at the snow on the Enjoy the Seasons Cricut Imagine cartridge.    Then my brain started spinning with what I could do to make the card unique.  For a couple of days that’s all that happened — my brain spun and not one good idea.  Then it hit me — I wondered what it would look like if I printed the window part on vellum and lit it from the back.

That is where the diorama card comes into play, as it has sections.  I used the tutorial for a diorama card posted on splitcoaststampers.com as my guide.

I altered the measurements so that a battery operated tealight candle would fit in the back section.  My two print papers I used on the diorama were printed from the Elise Imagine cartridge.  I wanted a print that was not necessarily holiday looking and thought the prints on Elise went well with the cat and dog image.   My finished card/luminaria measures about 6″ x 6″x 2.5″.

I cut my print paper so that the two blue pieces (the outside) were 11″ x 6″, cutting an oval from George & Basic Shapes out of one section for the front.   I scored 2.5″ from each end and folded on those marks.   Because the oval takes a huge chunk out of the front of the card, I found I had to stabilize it.  I cut a  piece of plain white cardstock with the oval, this time a little under 6″ wide,  and glued it to the inside center to give it some strength.

The middle section was cut from the mocha print at 9″ x 6″ with a 2.5″ x 1.5″ window cut from the center.  I scored each end of this piece at 1.5″ and folded.  This is what my pieces looked like.

I printed the cat and dog on the Imagine at 4″, printing it on vellum and then in layers on regular white cardstock.  I took my craft knife and cut out the sky between the window panes from the cardstock piece, so that the vellum sky would show through.  This pictures shows both the vellum print and the piece with the sky cut out of it.

I added some Stickles to the snow on the vellum and let it dry.  I trimmed the vellum and glued it on the mocha piece, lining the sky up with the cut-out rectangle.  Then I attached the cardstock piece with the cut out sky over that.  I did two layers of the love seat and attached it, then layered the cat and dog twice and attached them with pop-dots.  I printed a little sign from Enjoy the Seasons to hang above the window and added a blue pearl on each side.

I started assembling my pieces, putting the mocha and back section together first.  Before attaching the front, I cut a snowflake frame from Lacy Labels that I adjusted in Design Studio to fit the oval on the front.  I cut two layers, the top layer from a glittery cardstock and attached the frame around the oval.  I cut extra stars and snowflakes and popped them up on the frame.  Then I attached the frame to the other sections.   I used a tealight with a white LED flame, which I ordered online.  All I could find at my local stores were tealights with amber flames and I didn’t want an amber cast to my snow.  This picture shows the card from above, showing the different sections.  The tealight sits right below the vellum window.  Because there is no bottom to the card, you just have to set it over top of the tealight.

This picture shows the card from the side, so you can see how the front and back overlap each other.

It was hard trying to take a picture showing the lit window, but I think this one gives you a good idea of what it looks like.  The card will fold up, but it doesn’t  go completely flat.  I think I stuffed it too much.  I would not send it in an envelope — it would have to hand delivered or sent in a box.  But this one I plan on keeping for myself!

I had a lot of fun creating this card — it’s a little different from what I usually do.  I am already thinking of other projects using this concept.

  • Cricut cartridges – George & Basic Shapes, Imagine Elise, Imagine Enjoy the Seasons, Lacy Labels
  • Glitter cardstock
  • Stickles
  • Battery operated tealight candle
Filed Under: Bitten by the Bug 2, Card Challenges, Cards and Projects, Cartridges, Challenges, Cricut, Elise, Enjoy the Seasons, Lacy Labels (Lite), Stickles Tagged With: , , , ,

Butterfly Kisses Baby Girl Card

July 18, 2012 by 1 Comment

 

 

The weekly challenge on the Cricut Circle Blog is a card sketch challenge and you must use at least two Cricut cuts.  I thought I’d make a card on my Imagine, since I haven’t made a complete project using the Imagine.

I decided to make a baby card,  even though I don’t know anyone who is having a baby right now.  But it will be good to have on hand.  Again, for no particular reason, I made the card for a baby girl.

I used the Cricut Imagine cartridge Nursery Tails for this card.  All the paper is from this cartridge, as are the pink socks and the Butterfly Kisses title.  I embossed the brown floral background and the pink contrast strip with my Cuttlebug.  I cut the images in layers and inked around all the edges.   I added some ribbon, attached the socks with foam pop-dots and added three pearls by the tag.

For the inside of the card, I used a Cuttlebug die for the “Welcome Baby” and the bib is from Nursery Tails.

This is a fairly simple card, but I like the way it turned out.

  • Cricut Imagine Cartridge Nursery Tails
  • Cuttlebug
  • Ribbon, pearls
Filed Under: Card Challenges, Cards and Projects, Cartridges, Circle Challenge, Cricut, Nursery Tails Tagged With: , , , , , , ,

Barbie Suitcase Gift Card Holder for National Convention

July 14, 2012 by 3 Comments

 

I had a lot of fun with this project.  I was asked to make ten gift card holders that were to be handed out at the 2012 National Barbie Doll Collectors Convention this week in Garden Grove, CA.  They were originally going to hold gift cards, but then it was decided that they would contain raffle tickets.  I guess there are some fabulous prizes in the Raffle Room.  The theme of this year’s convention is The Grand Tour.

My first thought was to make the card shaped like a suitcase, as a rectangular shape would work well with a gift card.  I searched through suitcase cuts on mycutsearch.com and decided to use the one on the Summer Celebrations cartridge, since it looked sort of vintage.

I welded two shapes together at the bottom in Cricut Design Studio.  I cut the base of the card from chocolate Bazzill cardstock.  All the solid cardstock is Bazzill and the prints are from Basic Grey.  I chose a pink print for the front of the suitcase, using a neutral color for the hardware.  Since Paris and Rome are on the itinerary of the Convention, I cut those words from pink vinyl using the Word Collage cartridge.  Here is a picture of the vinyl lettering.

I chose a vintage stripe print for the lining of the suitcase.  I used a rectangle from George & Basic Shapes to create the pocket on the inside, using a punch to round the bottom corners.  Velcro at the top holds the suitcase together when closed.

The shoes, sunglasses and bra and panties are all cut from Forever Young.  I used a black glitter cardstock from Core’dinations for the shoes.  I applied Glossy Accents to the lenses on the sunglasses.

For the small flower embellishments on the shoes and bra and panties, I used the negative cuts from a Martha Stewart punch called Flower Shower.  It makes the tiniest of flowers.  I added Stickles to the centers of the flowers.

Now comes the most fun part — making the charms.  This was my first time using Ink Jet Shrinky Dinks to make charms.  I followed a great tutorial from the talented Nadia to make my charms.  Here are her step-by-step instructions.

I did not use my Imagine to make the charms as I used a jpg of the Convention logo.  I printed the design on the Shrinky Dink material using my ink jet printer.  So instead of having a Cricut to do my cutting, I hand cut around the charms.  I am not the greatest when it comes to cutting around objects — I got a little wobbly in places.  But the great thing about the Shrinky Dinks is that you don’t really see my wonky cuts.  Here is a photo showing the size of the print I started out with and what it looked like after shrinking.  I also lightened the jpg in Photoshop before printing, as the colors get intense with baking.

Following Nadia’s instructions, after the Shrinky Dinks baked and were flat, I applied some Ultra Thick Embossing Enamel (UTEE) to them.  I then popped them back in the oven and waited for the UTEE to melt.

I was so happy with the way they turned out — even my hubby thought they were neat.  The circle part of the charm is not quite an inch across — and look how well you can read the tiny lettering.

I attached jump rings in the holes and hung the charms from key chains that I shortened to fit on the suitcases.

Here are all ten suitcases.

  • Cricut Cartridges – Forever Young, George & Basic Shapes, Summer Celebrations, Word Collage
  • Bazzil cardstock
  • Basic Grey designer paper
  • Vinyl
  • Martha Stewart Flower Shower punch
  • Stickles
  • Glossy Accents by Ranger
  • Ink Jet Shrinky Dinks
Filed Under: Cards and Projects, Cartridges, Cricut, Forever Young, George and Basic Shapes, Martha Stewart Punches, Stickles, Summer Celebrations, Word Collage Tagged With: , , , , , , , ,
« Previous Page
Next Page »