Sunny Snail is Thinking of You!!

 

Erin is back in Taiwan after a lengthy visit here in the US.  I had lots of fun while she was staying with us.  We attended CHA every day and even managed to get in a scrapbook expo in Anaheim right before she left.  Once she got home to Taipei and settled in, she wanted to do a challenge together.  So we have been busily working,and thanks to Skype, we were able to scrap together.

A member of the Cricut Circle recently had surgery and I wanted to send her a card to wish her a speedy recovery and let her know I am thinking of her.  I thought doing a challenge would be a perfect way to accomplish this.  And here is a little Duffy “spokesbear” model to present my card:

The base of the card is green Bazzill bling cardstock.  The glittery print cardstock is from two different DCWV paper stacks, Blossoms & Butterflies and The Glitter Stack.  I used a yellow bling cardstock from Bazzill for the contrast, sun and snail body. 

I laid out my card in Design Studio and I cut the sun, snail and flowers with my Cricut.  I used Create a Critter for the sun, Birthday Bash for the snail and the Bloom Lite cartridge for the flowers.  I used my Cuttlebug to emboss the sun and the snail.  I embossed the snail with four different embossing folders, Swiss Dots, D’Vine Swirl, Plum Blossom and Mesh Texture.  I inked the edges of all the pieces to give them some depth.  I used Stickles on the center of the flowers and an atyou Spica glitter pen for the cheeks on both the sun and snail.  The sentiment on the envelope the snail has in his mouth is from a $1 clear stamp I purchased at Michaels.  I used lots of pop-dots on the sun and snail, popping up layers and also the completed pieces. 

I am loving all the baker’s twine that is so popular right now, but  I have not purchased any yet.  When I was in Michaels a couple of weeks ago, I found some Lily Sugar ‘n Cream Twists string/thread in the yarn department that reminded me of the twine.  It was on sale so I bought a few different colors to see how it would work.  I wrapped some of the blue around the bottom of this card and I think it looks pretty good.  I attached a charm to the twine with a little hanger that is from Making Memories.  I think they are called garment pins. 

For the inside of the card I added a couple of flowers that I cut out twice so I could layer them together for some dimension.  I used Stickles for the bling on the center of the flowers.

This was a fun card to create and I am happy to say that my card qualifies for the following challenges:

Fantabulous Cricut Challenge Blog – Challenge #51 “Hip to be Square” -green & gold

Cooking With Cricut – It’s A GREEN  SCENE!

The Cuttlebug Spot –  All Tied Up: twine challenge

The Cuttlebug Spot –  Oh so Charming

  • Bazzill bling cardstock
  • Die Cuts With a View paper stacks
  • Cricut cartridges:  Birthday Bash, Bloom (Lite), Create a Critter
  • Cricut Design Studio
  • Cuttlebug Embossing Folders:  D’Vine Swirl, Plum Blossom, Swiss Dots
  • Twine:  Lily Sugar ‘n Cream Twists
  • Making Memories garment pins
  • Charm from my stash
  • Stickles
  • atyou Spica glitter pen

Provo Craft Card Making Contest

Provo Craft is going to be announcing a new product on HSN on January 20, 2011.   Anna Griffin is also going to be introducing a new product on the same day.  Provo Craft is sponsoring a card making contest and the winners will receive both new products.  After each airing on HSN, two winners will be posted on Jinger Adam’s Facebook Page.

The requirements for the contest are that you create a card using at least one Anna Griffin product and one or more of these Cricut cartridges:  Don Juan, Wall Decor & More, and Winter Lace.  Entries have to arrive at Provo Craft offices no later than Tuesday, January 18, 2011.

I just mailed my card today, January 13, and I am hoping it arrives it time.  I sent it priority mail and it just has to go from CA to UT, but with this being a holiday weekend I am going to be holding my breath.

I went searching through my stockpile of cardstock because I was pretty sure I had some Anna Griffin paper somewhere.  I found two different paper pads, one with soft, subdued pastel prints and the other with bright, wild prints.  I opted to go with the bright prints and paired them with Bazzill solid cardstock.

My card is 5.5″ square and all cuts are from Wall Decor & More, with the exception of the tag.  The tag is cut from Don Juan.  The sentiment is computer generated and says, “When I am with you….My heart takes flight.”

I cut several layers for the butterfly and pop-dotted him on the front of the card.  I used Stickles for the butterfly’s body.  The ribbon is from Michaels — I got it on clearance at 70% off.  I attached the tag to the bow using a cell phone charm strap.

The inside of the card features more Anna Griffin paper and  hearts cut using Wall Decor & More.

  • Anna Griffin cardstock — Peyton Collection
  • Bazzill cardstock
  • Cricut cartridges:  Wall Decor & More, Don Juan
  • Stickles
  • Ribbon from Michaels
  • Cell phone charm strap

Cricut Circle Magazine Challenge for November – Little Deer Shaker Ornament

 

The first thing I have to say is how excited I am again — my penguin shaker ornament card was one of the winners at the Fantabulous Cricut Challeng Blog.  Thank you so much FCCB!!

Now on to the Cricut Circle magazine challenge, which I forgot all about when I made my penguin shaker ornament last week.  I posted my ornament card on the Cricut message board, and a fellow Circlet asked me if I was going to enter my card in the Circle magazine challenge.  She was even kind enough to give me the link.  I went to the website and reviewed the rules and saw that the project must be newly created, so I figured my penguin card would not qualify — especially since it had just won a challenge.  With time running out on the magazine challenge, I decided to create a new shaker ornament card especially for it. 

For this challenge, which is only open to Circle members, the project has to have at least four Cricut cuts and also use one other Provo Craft product — like the Cuttlebug, Yudu, etc. 

I made another shaker ornament card, only this time I put a deer inside.  I used Core’dinations Core Couture cardstock for the ornament — I like it’s glittery look.  I used the ornament from Joys of the Season cartridge.  I used Cricut Design Studio to weld two ornaments together to make the card.  I also welded a rectangle from George and Basic Shapes to the bottom so that the card can also stand alone if it is not hanging on the tree.

The deer is one of my favorite cuts and he is from the Cindy Loo cartridge.  The snowy hills are from Country Life, the trees from Christmas Cheer, the poinsettias from Winter Woodland, and the tag is from Very Merry Tags.  I cut the poinsettias from white cardstock and inked them blue.  I edged them using a Krylon Silver Leafing Pen and added silver Stickles to the centers.   

I used my Cuttlebug to emboss the background cardstock in the shaker using the Snowflakes embossing folder.  I also embossed the tops of the ornament, which I cut from silver metallic cardstock, using the Herringbone embossing folder. 

I used a Martha Stewart border punch to make the snowflakes that shake around in the card, using the negative cuts from the punch. 

As I did on the penguin ornament card, I put the silver tops on the insides and back of the card.

  • Core’dinations Core Couture cardstock
  • Cricut cartridges:  Christmas Cheer, Cindy Loo, Country Life, George and Basic Shapes Joys of the Season, Very Merry Tags and Winter Woodland
  • Cuttlebug embossing folders:  Herringbone and Snowflakes
  • Martha Stewart snowflake border punch
  • Silver Stickles
  • Krylon Silver Leafing Pen

Challenge Friday: Eerie – Weekly Challenge #1 at the Cricut Circle Blog

I am a member of the Cricut Circle, a select community of Provo Craft Cricut enthusiasts.  The new Circle blog was launched on October 1 and will be open to the public for the first ten days.  After that it will be available to Circle members only.

The blog is featuring weekly challenges and the first one began the day the blog launched.  This challenge is open to Circle members and requires you to use two cuts from the French Manor cartridge, an exclusive members-only cartridge.   You also had to use pearls or jewels on your project.

I created a Halloween card using DCWV’s Black Currant cardstock stack.  The solid color cardstock is from Bazzill.  I used French Manor for the mirror and the keys.  The bat, skull, spider and “eerie” sentiment are from the Happy Hauntings cartridge.  The spider webs are from Wild Card.  I used Stickles on the bodies of the spiders and added some teardrop-shaped jewels above the sconces on the mirror.  I bought the jewels at Joann’s (in the $1 bin) the night I did the card, not knowing at the time that they would work so well with the design. 

A few days ago, a Circle member (Capadia) posted a helpful tip for cutting small letters.  She suggested cutting them from vinyl.  You can find her post on her blog here.  I cut the “eerie” letters using vinyl and it worked perfectly, right down to the tiny dot for the “i”. 

On the inside of the card, I layered some cardstock and added another spider and web.

  • DCWV Black Currant stack
  • Bazzill Bling cardstock
  • Black vinyl (scrap) for sentiment
  • Cricut cartridges:  French Manor, Happy Hauntings, and Wild Card
  • Jewels from Joann’s ($1 bin)
  • Ranger Stickles – pink