Happy Birthday Cupcake Card

March 23, 2011 by 7 Comments

Mom and I decided on Monday that we’d try to enter the Jitterbuggin’ sketch challenge this week to motivate me to craft more — and put my now organized room to use!   This has been a busy week work-wise as I just finished up four days of writing non-stop for a special charity travel blogging event that was taking place.  I finished off my last post this morning and while I am exhausted, I am happy I participated.

Unfortunately, I didn’t leave myself much time to get a card done for the challenge so I spent the entire day crafting.  Since my birthday is rolling around again in two weeks, I joked with my husband that since we don’t really know where to get English birthday cards here, I will just make one for myself!

My Birthday Card

Making my own birthday card gave me an opportunity to use another recently purchased Taiwan stamp.  I love these three birds as they seem to coordinate with the 3 Birds on Parade Cricut cartridge!  I colored the birds with Copic Sketch Markers (well, tried anyways).

Close up detail of the Bday card

All the papers for this card were loose stock that I must have picked up at Michael’s or Joann’s at some point.  I ended up using four Cricut cartridges to make all the cuts on this card — it’s been so long since I did this much cutting with the Cricut, it was almost like starting over.

For all the rectangles and squares, I used Plantin Schoolbook again.  On the corners, I used wavy scissors to give one edge some contour.  The green rectangle “birthday present” is embossed with the Cuttlebug.  On each of the corners, I added buttons and green memory thread.  The stripes on the card are made using one of the $1 ribbon spools from Michael’s.

The layered flower cuts at the bottom are from the Sweet Treats cartridge.  The bow on the present is cut from the Birthday Bash cartridge.  I embossed it and then used dark purple ink to make the hearts on the bow stand out.  The small bird with the cupcake in the flower is from 3 Birds on Parade.  I cut several layers of each and used foam dots to pop them up.

Inside of the Bday card

On the inside, the “You Take the Cake” is from 3 Birds on Parade as well.  I added the little birdie letters from 3 Birds on Parade to make it “cupcake”.  The cupcake brad is from Michael’s and is just glued on to the popped up letters.

Inside detail on the card

After completing it and sharing it with Mom on Skype, I found out about several more challenges I could enter with it!  For this card, I am entering:

Jitterbuggin’ — It’s Not Easy Being Green

Fantabulous Cricut – Challenge #52 – Happy Birthday

Cuttlebug Spot — Buttons…Buttons Everywhere

Filed Under: 3 Birds on Parade, Birthday Bash, Card Challenges, Cards and Projects, Cartridges, Cricut, Cuttlebug Spot, FCCB, Jitterbuggin, Plantin Schoolbook

Sunny Snail is Thinking of You!!

March 19, 2011 by 15 Comments

 

Erin is back in Taiwan after a lengthy visit here in the US.  I had lots of fun while she was staying with us.  We attended CHA every day and even managed to get in a scrapbook expo in Anaheim right before she left.  Once she got home to Taipei and settled in, she wanted to do a challenge together.  So we have been busily working,and thanks to Skype, we were able to scrap together.

A member of the Cricut Circle recently had surgery and I wanted to send her a card to wish her a speedy recovery and let her know I am thinking of her.  I thought doing a challenge would be a perfect way to accomplish this.  And here is a little Duffy “spokesbear” model to present my card:

The base of the card is green Bazzill bling cardstock.  The glittery print cardstock is from two different DCWV paper stacks, Blossoms & Butterflies and The Glitter Stack.  I used a yellow bling cardstock from Bazzill for the contrast, sun and snail body. 

I laid out my card in Design Studio and I cut the sun, snail and flowers with my Cricut.  I used Create a Critter for the sun, Birthday Bash for the snail and the Bloom Lite cartridge for the flowers.  I used my Cuttlebug to emboss the sun and the snail.  I embossed the snail with four different embossing folders, Swiss Dots, D’Vine Swirl, Plum Blossom and Mesh Texture.  I inked the edges of all the pieces to give them some depth.  I used Stickles on the center of the flowers and an atyou Spica glitter pen for the cheeks on both the sun and snail.  The sentiment on the envelope the snail has in his mouth is from a $1 clear stamp I purchased at Michaels.  I used lots of pop-dots on the sun and snail, popping up layers and also the completed pieces. 

I am loving all the baker’s twine that is so popular right now, but  I have not purchased any yet.  When I was in Michaels a couple of weeks ago, I found some Lily Sugar ‘n Cream Twists string/thread in the yarn department that reminded me of the twine.  It was on sale so I bought a few different colors to see how it would work.  I wrapped some of the blue around the bottom of this card and I think it looks pretty good.  I attached a charm to the twine with a little hanger that is from Making Memories.  I think they are called garment pins. 

For the inside of the card I added a couple of flowers that I cut out twice so I could layer them together for some dimension.  I used Stickles for the bling on the center of the flowers.

This was a fun card to create and I am happy to say that my card qualifies for the following challenges:

Fantabulous Cricut Challenge Blog – Challenge #51 “Hip to be Square” -green & gold

Cooking With Cricut – It’s A GREEN  SCENE!

The Cuttlebug Spot –  All Tied Up: twine challenge

The Cuttlebug Spot –  Oh so Charming

  • Bazzill bling cardstock
  • Die Cuts With a View paper stacks
  • Cricut cartridges:  Birthday Bash, Bloom (Lite), Create a Critter
  • Cricut Design Studio
  • Cuttlebug Embossing Folders:  D’Vine Swirl, Plum Blossom, Swiss Dots
  • Twine:  Lily Sugar ‘n Cream Twists
  • Making Memories garment pins
  • Charm from my stash
  • Stickles
  • atyou Spica glitter pen
Filed Under: Birthday Bash, Bloom (Lite), Card Challenges, Cards and Projects, Cartridges, Cooking With Cricut, Create a Critter, Cuttlebug Spot, FCCB, Stickles, Uncategorized Tagged With: , , , , ,

Asian Inspired Panda St. Patrick’s Day Card

March 19, 2011 by 11 Comments

After months of travel and procrastination on cleaning my office/craft room, I finally had time to sit down this week and wanted to make a card.  Since this would be only the fourth card I’ve ever made to date, participating in some of the fun blog challenges out there might give me some design direction.

I’m now back in Taiwan and one of the ways I keep connected with Mom back in the U.S. is to craft together! She picked a few of her favorite challenges and we each came up with our own unique take on the required elements.  For this card, a few of the elements include green & gold, square card, use of a charm, twine, along with Cuttlebug and Cricut cuts.

To pay homage to both my Irish roots and my current life in Asia, I decided to combine the both and do an Asian inspired St Patrick’s Day card using a few of the new supplies exclusively available here in Asia.

Asian inspired St. Patrick's Day Card

Close up of St. Patrick's Day card

The card is 6 x 6 and uses a variety of papers I had laying around (not entirely sure which stacks they are all from – sorry!).

The large square paper cuts on the background and the oval on the panda were made with Cricut using Plantin Schoolbook.  (Took the circle shape and just made it an oval).  The yellow printed paper’s three sided border was made with Martha Stewart’s Punch Around the Page punches.

The stamped string of lanterns up top are some of my favorite new photo-polymer stamps from Lawn Fawn.  The string and Chinese lanterns are from their Lunar Lights collection and I used the shamrock in the Hats Off To You collection and just turned it upside down to “hang” them as well.  I colored them with Copics, and popped them up on some glitter green cardstock.

Lawn Fawn stamps used to make shamrock & Chinese lanterns

The Happy St. Patrick’s Day sentiment is also Hats Off To You stamp collection. I took a dark yellow ink pad & rubbed the paper with a makeup pad to give it a more yellow appearance.  It’s also popped up several times using the green glittery cardstock and a scrap of the yellow paper.

Sentiment also uses Lawn Fawn stamps

On the bottom I used a $1.00 ribbon find from Michaels that has green and yellow flowers.  The border of shamrocks is a local Taiwan-made die.  I just bought this last week, which was my first weekend back in town since leaving in January.  It’s so cute and the main reason I wanted to make a St. Patrick’s Day card for these challenges.  I used Marigold Glimmer Mist and then took a dark green ink pad to shade the edges.

Border die is from local Taiwan scrapbook and stamp store

Shamrock border die

I was a bit overzealous and decided to try a shaker and after hours of unsuccessful attempts of cutting a frame border that fit the perimeter of the shaker, I ended up going in a different direction.  The panda in the shaker was cut using a Cuttlebug style die purchased from a local store here in Taiwan.  The locally made die comes with the panda and a bamboo stalk as well.

Panda shaker element

Panda die from Taiwan

The panda’s hat is part of the Lawn Fawn Hats Off To You collection.  I cut it out and colored it with Copics.  The shamrocks in the panda’s hand were cut from the border design die and I used three smaller ones along with the tiny pieces left from the Martha Stewart punches to create the “shaker” elements. They reminded me of little hearts and provided an easy addition to the shaker.

Since I couldn’t manage to cut the right size frame for the shaker oval, I used small prima flowers all around the edges.  These are Summer Fun and Limeade “Iced Got Flowers” jars.  The centers on the flowers are jewels in the Imaginisce set for the I-rock tool.

The background paper on the panda is embossed with a bamboo stalk folder only available in Taiwan as well and matches the panda die.  Although supplies here are anything but inexpensive, I love picking up these great designs that I’ve never seen produced elsewhere (yet).  I used a dark orange ink pad to give some dimension to the bamboo stalks and then sprayed the paper with marigold glimmer mist again.

Bamboo embossing folder from Taiwan

The panda charm and twine are both items I picked up in my Taiwan scrapbook shopping travels as well.

Close up of panda charm

On the inside of the card, I went very simple and just used a Plantin Schoolbook square cut paper embossed with the Provo Craft Bamboo folder.  Again, I used some ink to give the bamboo stalks and the inside card edges some shading.

The challenges we are entering include:

The Cuttlebug Spot: All Tied Up: twine challenge

The Cuttlebug Spot: Oh so charming

Fantabulous Cricut: Hip to be Square -Green & Gold

Cooking with Cricut: Challenge 21: It’s a GREEN SCENE!

Filed Under: Card Challenges, Cards and Projects, Cartridges, Cooking With Cricut, Cricut, Cuttlebug, Cuttlebug Spot, FCCB, Plantin Schoolbook