This is My Little Black Dress Onesie and Matching Card

July 29, 2012 by 10 Comments

 

Several months ago I bought some black onesies so I could decorate them using heat transfer vinyl.  I went on to other things and the onesies just sat — until Bitten by the Bug 2 posted their Fashion Challenge.  That was the push I needed to get the onesies done.  And when I finished with the onesies (I made a 6 mos size and a 12 mos size), I made a matching card.  Now I have a couple of gift sets ready when I need them.

 

I saw this phrase on a onesie on the Internet a long time ago and always thought it would be fun to do.  I cut all the vinyl with my Cricut, using Design Studio to lay out everything.  For the necklace, I brought a cut from the Paper Doll Dress Up cartridge into Design Studio to use as a guide.  I enlarged the design until it fit the neck of the onesie.  I then took circles from George and laid them along the contour of the necklace, making sure they touched so I could weld them. Once I had circles completely covering the necklace shape, I deleted the necklace so that all was left was a string of pearls.  I cut this from white flock vinyl, so it has a fuzzy feel to it.

I used a variety of cartridges for the letters — sort of felt like I was putting together a ransom note.  I used Don Juan for the “this is my” and “dress” cuts.  I used Forever Young for “black” and Graphically Speaking for “little”.  I cut these out of white and pink glitter vinyl.

When cutting heat transfer vinyl, you have to remember to mirror the images.  I had no problem mirroring the words  “little” and “black” —  just had to check the “flip shapes” button in Design Studio.  But because I was putting the other words together myself using individual letters, I was having issues getting the words to mirror.  I finally figured out if I typed the words in backwards and then checked the “flip shapes” button that it worked.

I used Life’s a Party for the onesie card.  I welded two of the shadow bases together at the shoulders.  I embossed the black layer using my Cuttlebug and a 5″ x 7″ folder from the Once Upon a Princess Companion Set that has little roses all over.

The label on the front of the onesie is from the Phrases cartridge.  Because the lettering is so thin, I cut it from pink vinyl and used transfer tape to put it on the scalloped ovals.  I added a couple of glittery flowers that I picked up at a Tuesday Morning store a while ago.  I used 3 white dot embellishments that I got in one of Joann’s $1 bins for the snaps on the onesie.

For the inside of the card, I cut a white layer and inked the edges and then I stamped an image from a stamp I have in my stash.

  • Cricut cartridges – Don Juan, Forever Young, George & Basic Shapes, Graphically Speaking, Life’s a Party, Phrases
  • Cuttlebug – Once Upon a Princess Companion Set
  • Heat transfer vinyl
  • Assorted embellishments
Filed Under: Bitten by the Bug 2, Card Challenges, Cards and Projects, Cartridges, Challenges, Cricut, Cuttlebug, Don Juan, Forever Young, Graphically Speaking, Life's a Party, Phrases Tagged With: , , ,

Graduation Card — You Rock!!

June 17, 2012 by 12 Comments

A friend’s daughter graduated from middle school a few days ago.  I wanted to make her a card that was not the average grad card — I wanted something a little funky and feminine.  I know she enjoys music, and just to prove how old I am, I have never heard of the groups she likes!

I decided to go with the phrase, “You Rock.”  I found the phrase on the Cricut Phrases cartridge and liked the bold design.  However, this particular phrase came with a lightning bolt at the end of it.  So to make it more feminine, I welded a rose from the Indie Art cartridge over top of the lightning bolt.  I also decided to make this a shaped card.

The fun part of this card was printing and cutting the layers on my Imagine.  I used the Floral Emporium cartridge for the prints and solid colors (excluding the black cardstock).  I love the bright colors and fun prints on this cartridge.  I used my Cuttlebug to emboss the bright pink print paper on the phrase and rose.  The grad hat was cut from Everyday Pop-Up cartridge.

I used pop dots on the grad hat, rose and the “you” on the phrase to add depth.

For the inside of the card, I printed and cut a greeting from the Imagine cartridge, Greeting Cards Inside & Out.

When I was laying out the card in Design Studio, I was trying to keep the dimensions so the card would fit into a #10 envelope.  However, this is a big card and ended up being about an 1″ too large either way, so I made a custom envelope for it.  Luckily the card was hand delivered so I didn’t have to worry about postage.

As I was working on this card, Bitten by the Bug 2 announced their latest challenge — the Rose Challenge.  I was so happy because I would be able to enter this card in the challenge.

  • Cricut Cartridges:  Everyday Pop-Up, Imagine Floral Emporium, Imagine Greeting Cards Inside & Out, Indie Art, Phrases
  • Cuttlebug
Filed Under: Bitten by the Bug 2, Card Challenges, Cards and Projects, Cuttlebug, Everyday Pop-Up, Indie Art, Phrases Tagged With: , , ,

Surprise Birthday Layout — My First Layout

April 22, 2011 by 2 Comments

 

This is my first layout ever — and I really struggled with it.  Up to this point I have just made cards with my Cricut.  I have no trouble deciding and laying out what I want on my card fronts, but doing a 12″ x 12″ page proved to be a challenge. 

I wanted everything on my layout to flow and look like it was put there for a purpose.  I even went to the Cricut Circle Blog and watched their tutorial again on how to do a layout.  After watching the video I felt I had a better grasp of things, but once I started cutting I wasn’t so sure. 

The patterned paper is from SEI — their Happy Day collection.  Since I had the paper pad in my stash and knew I wanted to use it, that is the only thing I was certain about on this project.  Once I got my background paper laid out and the banner done, then the rest sort of came together.   I laid out everything in Design Studio before I started cutting anything. 

The large scallop square background is cut from the Cindy Loo cartridge.  The banner, the cat jumping out of the cake, and the gifts are all from Birthday Bash.  The streamers are from Celebrations and all the circles are from George. 

I think I cut the center circle at 7″.  Then I measured and found the center and started slicing the circle, but didn’t cut it all the way from edge to edge.  I left about 1/2″ intact at each edge of the circumference.  I glued it to the layout right-side down, so that when I pulled back the slices the pattern paper showed.  Before gluing each of the points down, I cut a ring of solid turquoise cardstock to cover the raw edges of my sliced circle.  I added some white rick rack to the ring.  Then I put adhesive on each of the points of the slices and adhered them to my layout. 

Side view so you can see the dimension of the layout

This was my first time making rosettes and I used my Martha Stewart scoreboard to make the pleats.  That was a lot of fun, except that making those score marks every 1/4″ is hard on arthritic hands. 

I used lots of Stickles — I coated all the letters in the banner.  I think the color I used was copper.  I added Stickles to the gifts, the cake, and all the streamers got coated in them.  I used DMC Memory Thread to string up my banner and for the center of the button on the rosette.  I love that stuff — it’s so easy to work with.

Close up of the title banner

Close up of the cat in the cake

Close up of the gifts

The little “birthday bash” tag was cut with my Cuttlebug using the Tiny Tags die.  I did the sentiment on the computer.  Oh, also did lots of inking and doodling and stitched the turquoise cardstock to the pink cardstock with my sewing machine. 

  • SEI Happy Day paper
  • Cricut cartridges:  Birthday Bash, Celebrations, Cindy Loo, George & Basic Shapes
  • Cuttlebug — Tiny Tags die
  • Stickles
  • DMC Memory Thread
Filed Under: Birthday Bash, Cartridges, Celebrations, Cindy Loo, Cricut, Cuttlebug, George and Basic Shapes, Layouts Tagged With: , , ,

Asian Inspired Panda St. Patrick’s Day Card

March 19, 2011 by 11 Comments

After months of travel and procrastination on cleaning my office/craft room, I finally had time to sit down this week and wanted to make a card.  Since this would be only the fourth card I’ve ever made to date, participating in some of the fun blog challenges out there might give me some design direction.

I’m now back in Taiwan and one of the ways I keep connected with Mom back in the U.S. is to craft together! She picked a few of her favorite challenges and we each came up with our own unique take on the required elements.  For this card, a few of the elements include green & gold, square card, use of a charm, twine, along with Cuttlebug and Cricut cuts.

To pay homage to both my Irish roots and my current life in Asia, I decided to combine the both and do an Asian inspired St Patrick’s Day card using a few of the new supplies exclusively available here in Asia.

Asian inspired St. Patrick's Day Card

Close up of St. Patrick's Day card

The card is 6 x 6 and uses a variety of papers I had laying around (not entirely sure which stacks they are all from – sorry!).

The large square paper cuts on the background and the oval on the panda were made with Cricut using Plantin Schoolbook.  (Took the circle shape and just made it an oval).  The yellow printed paper’s three sided border was made with Martha Stewart’s Punch Around the Page punches.

The stamped string of lanterns up top are some of my favorite new photo-polymer stamps from Lawn Fawn.  The string and Chinese lanterns are from their Lunar Lights collection and I used the shamrock in the Hats Off To You collection and just turned it upside down to “hang” them as well.  I colored them with Copics, and popped them up on some glitter green cardstock.

Lawn Fawn stamps used to make shamrock & Chinese lanterns

The Happy St. Patrick’s Day sentiment is also Hats Off To You stamp collection. I took a dark yellow ink pad & rubbed the paper with a makeup pad to give it a more yellow appearance.  It’s also popped up several times using the green glittery cardstock and a scrap of the yellow paper.

Sentiment also uses Lawn Fawn stamps

On the bottom I used a $1.00 ribbon find from Michaels that has green and yellow flowers.  The border of shamrocks is a local Taiwan-made die.  I just bought this last week, which was my first weekend back in town since leaving in January.  It’s so cute and the main reason I wanted to make a St. Patrick’s Day card for these challenges.  I used Marigold Glimmer Mist and then took a dark green ink pad to shade the edges.

Border die is from local Taiwan scrapbook and stamp store

Shamrock border die

I was a bit overzealous and decided to try a shaker and after hours of unsuccessful attempts of cutting a frame border that fit the perimeter of the shaker, I ended up going in a different direction.  The panda in the shaker was cut using a Cuttlebug style die purchased from a local store here in Taiwan.  The locally made die comes with the panda and a bamboo stalk as well.

Panda shaker element

Panda die from Taiwan

The panda’s hat is part of the Lawn Fawn Hats Off To You collection.  I cut it out and colored it with Copics.  The shamrocks in the panda’s hand were cut from the border design die and I used three smaller ones along with the tiny pieces left from the Martha Stewart punches to create the “shaker” elements. They reminded me of little hearts and provided an easy addition to the shaker.

Since I couldn’t manage to cut the right size frame for the shaker oval, I used small prima flowers all around the edges.  These are Summer Fun and Limeade “Iced Got Flowers” jars.  The centers on the flowers are jewels in the Imaginisce set for the I-rock tool.

The background paper on the panda is embossed with a bamboo stalk folder only available in Taiwan as well and matches the panda die.  Although supplies here are anything but inexpensive, I love picking up these great designs that I’ve never seen produced elsewhere (yet).  I used a dark orange ink pad to give some dimension to the bamboo stalks and then sprayed the paper with marigold glimmer mist again.

Bamboo embossing folder from Taiwan

The panda charm and twine are both items I picked up in my Taiwan scrapbook shopping travels as well.

Close up of panda charm

On the inside of the card, I went very simple and just used a Plantin Schoolbook square cut paper embossed with the Provo Craft Bamboo folder.  Again, I used some ink to give the bamboo stalks and the inside card edges some shading.

The challenges we are entering include:

The Cuttlebug Spot: All Tied Up: twine challenge

The Cuttlebug Spot: Oh so charming

Fantabulous Cricut: Hip to be Square -Green & Gold

Cooking with Cricut: Challenge 21: It’s a GREEN SCENE!

Filed Under: Card Challenges, Cards and Projects, Cartridges, Cooking With Cricut, Cricut, Cuttlebug, Cuttlebug Spot, FCCB, Plantin Schoolbook

Snow Bird

January 16, 2011 by 22 Comments

 

Here’s another card that I made for several challenges and I had a lot of fun making it.  Unfortunately it will be my last card for a while.  The next couple of weeks are going to be filled with embroidery and trade shows.  CHA is coming up at the end of the month and Erin is flying home from Taiwan to attend with me. 

There’s lots of sparkle on this card as the little snow bird makes his winter home in a warm mitten.  The solid cardstock is from Bazzill and the patterned paper is called Snowflake Waltz and is from Daisy Bucket Designs.

I wanted to do a cardinal for my bird, but I wanted a chubby little guy and I couldn’t find one on any of my Cricut cartridges.  I found a cute bird on Straight from the Nest and decided to use him.  As I was laying out the card in Design Studio, I kept trying to figure out how to make the bird into a cardinal shape.  My solution was to use a lower case “v” from the Mickey Font cartridge.  I turned it upside down and welded it to the top of the bird’s head.  I used Copic markers to color the dark spot on his face.  I’m pleased with how he came out.

The circles are cut from the George and Basic Shapes cartridge and I used my Cuttlebug to emboss both of them.  The mitten is from Simply Charmed, the large snowflake is from Joys of the Season, “Snow Bird” is from Straight from the Nest, and the bird’s scarf is from 3 Birds on Parade. 

I added lots of bling to this card.  I heat embossed the large snowflake on the front using holographic embossing powder.  I put some fine snow on the sentiment using Martha Stewart glitter.  The coarser snow is also from Martha Stewart.  The small snowflake on the mitten is a Martha Stewart punch.  I added rhinestones to the centers of the snowflakes.

While I was working on this card, the song “Snowbird” by Anne Murray kept running through my head.  I printed part of the chorus and put it on the inside of the card.   The snowflake on the inside is from Joys of the Season.

 Here are the challenges I am entering and the requirements for each:

Jitterbuggin – For the Birds Challenge – follow the sketch, add a Cricut bird and use something pink.

Fantabulous Cricut – Challenge #42 Winter Warmies – create a project using some type of winter clothing or accessory.

Cooking With Cricut – Glittermania! – glitz up your project.

The Cuttlebug Spot – Inspired by a Song – find inspiration for your project in a song.

  • Bazzill cardstock
  • Designer paper – Snowflake Waltz from Daisy Bucket Designs
  • Cricut cartridges:  3 Birds on Parade, George and Basic Shapes, Joys of the Season, Mickey Font, Simply Charmed, and Straight from the Nest.
  • Cricut Design Studio
  • Cuttlebug
  • Copic markers
  • Ranger holographic embossing powder
  • Martha Stewart punch
  • Martha Stewart glitter
  • Rhinestones from stash

 

 

Filed Under: 3 Birds on Parade, Card Challenges, Cooking With Cricut, Copics, Cricut, Cuttlebug, FCCB, Jitterbuggin, Joys of the Season, Mickey Font, Simply Charmed, Straight from the Nest Tagged With: , , , , , , , , ,

Jitterbuggin’ Gifts Galore Challenge and Fantabulous Cricut Ribbon Challenge

December 1, 2010 by 10 Comments

 

I haven’t been able to make many cards lately because this is my busy time of the year with the embroidery business.  I’ve had two machines running since Thanksgiving.  I’m taking a short break this weekend to go away with hubby to celebrate our 44th anniversay.  I wrapped up a couple of embroidery jobs on Tuesday and found time to make a card. 

I made this card to enter into two challenges.  At Jitterbuggin, Sherri asked us to make a card with a gift theme.  The sketch is not mandatory this week — we just have to add a bow and some bling — and, of course, use our Cricut.

At Fantabulous Cricut we have to use ribbon somewhere on our project and, again, have a Cricut cut on it.

I made a card with a little mouse bearing a gift, which he wrapped up so prettily and tied with a bow.  The designer paper is Christmas Mint from SEI.  I used glitter cardstock from Core’dinations for my bling.  I am really happy with the way it cuts in the Cricut.

The little mouse is from the Winter Frolic Cricut cartridge.  The frame he is mounted on is from Lacy Labels Lite cartridge and I cut the tag from the Very Merry Tags cartridge.  The printing on the tag, “not a creature is stirring”, is a download I got from the Cutting Cafe.  I wanted something small and didn’t have time to try and put text on a circle myself, so I was happy to find the saying I wanted for a very reasonable price — just 99 cents.  The text on the inside of the card is also from this same download.  I cut out the text for the tag using my Cuttlebug and Nestabilities scalloped circles.

I cut the tag, the scarf, the bow on the present as well as mats from the glitter cardstock.  I found a piece of 1 1/2″ wide green satin ribbon in my stash and tied it around the middle of the card.  I attached the tag to the bow with a scrap of ribbon edged in metallic gold. 

The inside of the card has another little mouse and I cut this one from the new Birthday Bash cartridge.  When I laid out my card in Design Studio, I planned on putting this mouse on the front of the card and the mouse with the gift on the inside of the card.  But once I started cutting out the pieces and laying out the actual card, I decided to switch mice.  I thought the mouse carrying the gift looked better on the front of the card.  Oh, I almost forgot — for both mice I used very small pom poms for their noses. 

  • SEI Christmas Mint paper
  • Core’dinations glitter cardstock
  • Cricut cartridges:  Birthday Bash, Lacy Labels, Very Merry Tags and Winter Frolic
  • Cuttlebug
  • Spellbinders Nestabilities
  • Text for tag from Cutting Cafe
  • Ribbon and pom poms from stash
Filed Under: Birthday Bash, Card Challenges, Cards and Projects, Cartridges, Cricut, Cuttlebug, FCCB, Jitterbuggin, Lacy Labels (Lite), Very Merry Tags, Winter Frolic Tagged With: , , , , , , ,

Jitterbuggin’ Challenge – Let’s Give Thanks! – Thanks From the Bottom of My Heart

November 24, 2010 by 2 Comments

The current challenge at Jitterbuggin’ is to follow the sketch, add a Cricut cut and emboss something. 

I’m not sure where my colors for this card came from — I must have been in a “bright” mood.  I recently received an order from Stampin’ Up and it was sitting in a box and I started pulling out colors.  All the colored cardstock is from Stampin Up’.

I embossed the three center sections using my Cuttlebug and the following folders:  Spots & Dots, Textile Texture and Forest Branches.  I inked each folder with a different color of ink and then ran white cardstock through the Cuttlebug.  The white scalloped trim around the center section is a Martha Stewart Punch Around the Page set called Scallop 3-Dot.  I used just the very top part of the punched piece — the top dot.  I had to piece it because my cardstock size was not the exact size to take advantage of the punch-around-the-page feature.

I used my Cricut to cut out the skunk from the Create a Critter cartridge.  I also cut the heart-shaped balloon from Create a Critter.  The “thanks” is cut from Don Juan.  I attached some ribbon to the ballon and then attached it to the skunk’s hand.  I added a bow to the ballon. 

For the inside of the card, I cut another heart from Create a Critter.  I printed the sentiment on the computer.  I added another bow to the inside heart.

  • Stampin’ Up cardstock
  • Cricut cartridges:  Create a Critter and Don Juan
  • Cuttlebug folders:  Spots & Dots, Textile Texture and Forest Branches
  • Martha Stewart Scallop 3-Dot Punch Around the Page set
  • Ribbon from my stash
Filed Under: Card Challenges, Cards and Projects, Cartridges, Create a Critter, Cricut, Cuttlebug, Don Juan, Jitterbuggin, Martha Stewart Punches Tagged With: , , , , , ,

Speedy Turtle – Fantabulous Cricut Challenge Blog – Challenge #36 Achoo!

November 21, 2010 by 8 Comments

Here is my card for the current challenge at the Fantabulous Cricut Challenge Blog, which is to make a project that has something to do with being sick.  I don’t know why, but this challenge stumped me.  I couldn’t think of anything exciting that I wanted to make.  I started several different projects before the light bulb finally went off and I had a clear vision of what I wanted to make.

The card base is Bazzill cardstock, the patterned paper is Basic Grey, and the solid that the turtle is cut from is Stampin’ Up.  I cut the turtle using my Cricut and the Create a Critter cartridge.  Since I am wishing the recipient a speedy recovery, I figured I needed to give my turtle some running shoes so she could speed things up a bit.  I cut the shoes from My Community and laced them up with some white cording that I found in my stash.  I used the Cuttlebug embossing folder Swiss Dots to emboss the bottom edge of her shoes.  I also gave her a hat, which I cut from Paper Doll Dress Up.  The label that the sentiment is printed on is from a Lite cartridge, Lacy Labels.  I used Create a Critter for the flowers and the tufts of grass.  I added pearls to the centers of the  flowers. 

The flowers on the inside of the card are also from Create a Critter. 

  • Bazzill cardstock
  • Stampin’ Up cardstock
  • Basic Grey designer paper
  • Cricut cartridges:  Create a Critter, Lacy Labels (Lite), My Community, Paper Doll Dress Up
  • Cuttlebug Swiss Dots embossing folder
  • Pearls
  • Cording from my stash
Filed Under: Card Challenges, Create a Critter, Cuttlebug, FCCB, Lacy Labels (Lite), My Community, Paper Doll Dress Up Tagged With: , , , , , ,

Cricut Circle Magazine Challenge for November – Little Deer Shaker Ornament

November 19, 2010 by 5 Comments

 

The first thing I have to say is how excited I am again — my penguin shaker ornament card was one of the winners at the Fantabulous Cricut Challeng Blog.  Thank you so much FCCB!!

Now on to the Cricut Circle magazine challenge, which I forgot all about when I made my penguin shaker ornament last week.  I posted my ornament card on the Cricut message board, and a fellow Circlet asked me if I was going to enter my card in the Circle magazine challenge.  She was even kind enough to give me the link.  I went to the website and reviewed the rules and saw that the project must be newly created, so I figured my penguin card would not qualify — especially since it had just won a challenge.  With time running out on the magazine challenge, I decided to create a new shaker ornament card especially for it. 

For this challenge, which is only open to Circle members, the project has to have at least four Cricut cuts and also use one other Provo Craft product — like the Cuttlebug, Yudu, etc. 

I made another shaker ornament card, only this time I put a deer inside.  I used Core’dinations Core Couture cardstock for the ornament — I like it’s glittery look.  I used the ornament from Joys of the Season cartridge.  I used Cricut Design Studio to weld two ornaments together to make the card.  I also welded a rectangle from George and Basic Shapes to the bottom so that the card can also stand alone if it is not hanging on the tree.

The deer is one of my favorite cuts and he is from the Cindy Loo cartridge.  The snowy hills are from Country Life, the trees from Christmas Cheer, the poinsettias from Winter Woodland, and the tag is from Very Merry Tags.  I cut the poinsettias from white cardstock and inked them blue.  I edged them using a Krylon Silver Leafing Pen and added silver Stickles to the centers.   

I used my Cuttlebug to emboss the background cardstock in the shaker using the Snowflakes embossing folder.  I also embossed the tops of the ornament, which I cut from silver metallic cardstock, using the Herringbone embossing folder. 

I used a Martha Stewart border punch to make the snowflakes that shake around in the card, using the negative cuts from the punch. 

As I did on the penguin ornament card, I put the silver tops on the insides and back of the card.

  • Core’dinations Core Couture cardstock
  • Cricut cartridges:  Christmas Cheer, Cindy Loo, Country Life, George and Basic Shapes Joys of the Season, Very Merry Tags and Winter Woodland
  • Cuttlebug embossing folders:  Herringbone and Snowflakes
  • Martha Stewart snowflake border punch
  • Silver Stickles
  • Krylon Silver Leafing Pen
Filed Under: Card Challenges, Christmas Cheer, Cindy Loo, Circle Challenge, Country Life, Cuttlebug, Joys of the Season, Martha Stewart Punches, Very Merry Tags, Winter Woodland Tagged With: ,
« Previous Page